[Poll for interest] OpenTherm Gateway pcbs

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Locked
Lennart
Member
Member
Posts: 497
Joined: Sat Jul 22, 2006 10:58 am
Location: Netherlands

[Poll for interest] OpenTherm Gateway pcbs

Post by Lennart »

[Poll for interest] a limited number of OpenTherm Gateway printed circuit boards.

UPDATE: the original boards are all gone, but if there's enough interest, I'll be willing to have another batch made. See my posting below.
UPDATE 2: we've made it for the second batch. Topic closed for now, unless another 10 people jump in ;-).
UPDATE 3: we've made it for the third batch. As there still seems to be additional interest, I'll start a fourth batch.

The board is discussed in this topic:

domoticaforum.eu/viewtopic.php?f=70& ... =60#p58086

The board itself is described at:

http://www.tclcode.com/opentherm/index.html#gateway

I wanted one myself and had to order 10 at the same time. These pcbs are blue with ENIG finish (= golden pads for good solderability):

Image

Image

Price: EUR 6,50 each + EUR 1,- shipping within NL.

Contact me by PM or reply to this post if you're interested.

The parts to complete the build can be ordered directly from Conrad:

tclcode.com/opentherm/schematic.html#pa ... l#partlist
Last edited by Lennart on Wed Oct 10, 2012 8:08 am, edited 7 times in total.
pendul
Starting Member
Starting Member
Posts: 12
Joined: Fri Sep 21, 2012 12:53 pm

Re: [Reserved] OpenTherm Gateway pcbs

Post by pendul »

Hi Lennart,

I would be very much interested, so if anyone isn`t buy one of the boards, you can count me in.

Greetz,

Pendul
gvdham
Member
Member
Posts: 111
Joined: Sat Oct 03, 2009 10:19 pm
Location: Netherlands

Re: [Reserved] OpenTherm Gateway pcbs

Post by gvdham »

me too
Viper1970
Starting Member
Starting Member
Posts: 23
Joined: Sun Nov 09, 2008 3:15 am
Location: Netherlands

Re: [Reserved] OpenTherm Gateway pcbs

Post by Viper1970 »

i'm interested a well
Lennart
Member
Member
Posts: 497
Joined: Sat Jul 22, 2006 10:58 am
Location: Netherlands

Re: [Reserved] OpenTherm Gateway pcbs

Post by Lennart »

Ok, if there's enough interest, I'll be willing to order another batch of 10 boards. These will again be blue but with normal HASL finish (tinned pads).

Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.

So far, I have:

1 - Sanka
2 - Pendul
3 - gvdham
4 - Viper1970
5 - Herbus
6 - Willem4ever
7 - gjniewenhuijse
8 - Antoon
9 - Templar
10 - [Reserve board, in case of any problems]

Please send me a PM if you are certain that you want a board. And, also, please send me a PM if you're currently on the list and not interested anymore.

UPDATE: It looks we've made it! :-) I'll order the boards.

Lennart
Last edited by Lennart on Tue Oct 02, 2012 7:04 pm, edited 2 times in total.
pendul
Starting Member
Starting Member
Posts: 12
Joined: Fri Sep 21, 2012 12:53 pm

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by pendul »

I can not send you a pm (not enough messages for the moment), but I am still interested.
gjniewenhuijse
Member
Member
Posts: 140
Joined: Thu Jul 16, 2009 12:04 pm
Location: Netherlands

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by gjniewenhuijse »

Is it also possible to order a complete board (ready to use)? with components and programmed pic?
Lennart
Member
Member
Posts: 497
Joined: Sat Jul 22, 2006 10:58 am
Location: Netherlands

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by Lennart »

@gjniewenhuijse: you have a PM.
Antoon
Member
Member
Posts: 434
Joined: Fri Sep 29, 2006 6:28 pm
Location: Netherlands

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by Antoon »

+1
- Antoon
pendul
Starting Member
Starting Member
Posts: 12
Joined: Fri Sep 21, 2012 12:53 pm

Re: [Sold] OpenTherm Gateway pcbs

Post by pendul »

Lennart, thanks for ordering, can't wait until it is delivered, until then, I guess I have to work on my old and probably rusty soldering techniques ;)
Jeffrey
Member
Member
Posts: 136
Joined: Tue Jun 09, 2009 3:34 pm
Location: Netherlands

Re: [Sold] OpenTherm Gateway pcbs

Post by Jeffrey »

@Lennart: My pcb arrived in mint condition. Thanks for the quick service!
Mark59
Starting Member
Starting Member
Posts: 1
Joined: Fri Oct 05, 2012 4:14 pm

Re: [Sold] OpenTherm Gateway pcbs

Post by Mark59 »

Hallo Lennart, ik zou ook graag een Gateway PCB willen bestellen, ben echter nieuw op dit forum en weet nog niet goed de weg .
Ik kan kennelijk ook nog niet PM'n . hoor graag van je Groet Mark
jeroenc
Member
Member
Posts: 62
Joined: Tue Feb 15, 2011 2:09 pm
Location: Huissen

Re: [Sold] OpenTherm Gateway pcbs

Post by jeroenc »

Hoi Lennart, kan ik er nog een bestellen? Groeten, Jeroen
Lennart
Member
Member
Posts: 497
Joined: Sat Jul 22, 2006 10:58 am
Location: Netherlands

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by Lennart »

Ok, let's see if we can find enough people for a third batch...

UPDATE: Ok, we've made it. Batch is fully reserved, boards have been ordered. I''ve contacted all of you for payment and shipping info.

Same conditions as before: blue pcb, HASL finish. Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.

So far, I have:

1 - Mark59
2 - jeroenc
3 - daferra
4 - Zefram
5 - Edwin
6 - HanvA
7 - geert-jan
8 - Bastiaan
9 - spierie
10 - [Reserve board in case of any problems]

Please send me a PM or reply here if you are not on the list yet and certain that you want a board. And, also, please let me know if you're currently on the list and not interested anymore.

Lennart
Last edited by Lennart on Wed Oct 10, 2012 8:07 am, edited 7 times in total.
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: [Poll for interest] OpenTherm Gateway pcbs

Post by raymonvdm »

I think of building a Gateway to and would like to order the board if i know for shure it wil work with my boiler.


So please place me on the list for know 8)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Locked

Return to “Opentherm Gateway Forum”