Home Automation Domotica Forum Europe, Bwired Forum

Hello The Hogh & All, I have a non booting Toon1 on which I performed the ToonReovery procedure with Rasperry3. This worked well without errors. After the process I connected a TTL to USB converter to the Toon pins 11/13/14 and a PC with terminal program. I don't see the Toon Recovery Environmen...

Your damn right Hogh That is what I learned too

Regards

I checked OpenOCD, didn't start. With dpkg -l it appeared not to be installed . I installed it and afterthat script ended successfully!

Toon is functioning OK

Hogh many thanks for your support. (learned a lot )

Regards

I executed ToonRooter script. Isn't so that this script automatically downloads all necessary folders/files? I checked ToonRooter folder, all folders/files are there.

I prepared fresh Raspbian uSD card and repeated procedure according Readme.md again. Still same error,

I executed the ToonRooter of the TSC repo,
or do you mean the Root-a-Toon script using
Rpi wifi Hotspot?

I did with the script of Marten then I encountered
this problem.

I'm not Linux expert. I don't know how to get into the Toon prompt with the Raspberry terminal screen.

Please give command to do that and how to check existence of file subprocess.py ?

Thanks

Dear Moderators and other Experts, During the rooting, after command sudo python --jtag-available I encountered OS error 2 "No such file or directory". I use a Raspberry Pi3B, checked wiring several times. I attached commands/responses/level debug output. Can you advice me, any tips? Thank...

Hello Reader, I bought 2 pcs. 4-NOKS zigbee ZR-plug energy meter for connection on the wall outlet. I want to connect this meter to a data reception device (smartcom 2N). In the configuration of the smartcom it asks for the IEEE address of the ZR-plug. On/with this plug no address is given. Is there...