Home Automation Domotica Forum Europe, Bwired Forum

Hi all, I have my OTGW (pre-assembled from NodoShop) connected to my balenaFin home controller (which is a ruggedized raspberry pi CM3 baseboard) through a USB-serial adapter. The device is running balenaOS, so all the services are containerized. I've set up ser2net to serve the serial port to the N...

finalcut62 wrote:Marten, jouw script heeft t gisteren perfect gedaan. Heb jij nog een donatie-optie, zodat ik je op z'n minst een paar biertjes kan doneren via Paypal?

Hi finalcut62,

You're welcome. No need to donate anything.

Literally 5 minutes after posting my gateway stopped working (after working fine for about 24 hours). I've just ordered a preassembled one to replace it.

The data sheet for that one specifies the voltage to be between 4.0V and 4.6V @ 50mA. However, we're dealing here with only 2mA, which may be the reason for the deviation you're seeing. You would be better off using a zener designed for lower currents. The one I suggest on the site is specified to ...

Do you think I should replace D11? I've previously used this diode for D11. Should that one work?

I just read a similar issue in this post , and checked out the voltages mentioned in that thread on my board. They're all a bit different from the values they're supposed to be, but are still quite similar. I'm wondering if these could be the issue. Of course, I am using a different boiler now from ...

This is normal for the Honeywell Round Modulation. It doesn't turn on its display until it has received some response. So, you are investigating the wrong device. You just have to connect the boiler to the OTGW. Or, if you already have, look into why it is not producing any responses. Okay, that's ...

Hi everyone, I recently moved house and took my (previously working) OTGW with me. I bought this from Kiwi electronics in 2017 and it worked fine previously. Now, I'd like to connect it in the new house and I can't seem to get it to work. I have a Bosch HRE 35 boiler and an (old version) Honeywell R...

Thanks for your support. I managed to root my toon using the manual method. I get a blue screen of death (BSOD) on Windows 10 because of the cheap China USB-to-serial adapter which is installed using the old Vista driver. A workaround that worked for me is installing VM Virtualbox and installing a ...

I just merged TheHogNL's pull request which automatically disables the VPN after rooting. This should keep many users from bricking their Toon.

Thanks, So if i install Ubuntu 18.04 with Python 2.7, I can use the terminal inside Ubuntu to run the script? So I attach the 3 serial cables to Toon and the USB-to-Serial adapter and connect to the (ubuntu) pc. is the USB-to-serial supported by linux OS like Ubuntu, because on the website of Proli...

For R8 you don't need jtag indeed. But if you want to use the auto rooter you need the Raspberry PI. The only difference between jtag and only serial is just a few dupont cables extra. With R8 you only need 3 wires, or indeed a USB serial device. The script should actually run fine on any Linux-bas...

Could you show me the output for this command: cat /etc/issue && python --version && python -c 'import cryptography as c ; print(c.__version__)' Perhaps reinstalling python-cryptography could help as well. It may have been corrupted in some way. This is the output: Raspbian GNU/Linu...

I want to root my Toon using the script from GitHub and a Raspberry Pi but after connecting everything I get the following error message: (...) Any idea what's going wrong? Hi uibeltje, I just checked what's happening on these lines, and on my machine everything works fine. Could you show me the ou...

I rooted a clean Toon with 5.0.4 today and made a few changes accordingly. The PR that TheHogNL made is also merged. I did notice a case where it may fail in some random cases (see the issue I created today). In these cases, rooting again should fix it.