Home Automation Domotica Forum Europe, Bwired Forum

Hi I have an old CV, a Nefit Ecomline and a special Moduline thermostat I believe the thermostat does some kind off moduline the temperature, i think But because it is not using openterm, i can only use on off regulating with the toon Because of that i think it is a going down in comfort and dont wa...

Thanks

I did not configure the wifi jet.
I want to connect toon by wire, and NOT by wifi

There is no info in the wether app, so i think toon waits for a connection by wifi
Does have anyone some experience with getting all apps (and toon) working over ethernet.

Thanks

Here some data: 5 minuten na startup - met starten x11vnc - tigervnc not connected Mem: 109748K used, 16448K free, 128K shrd, 0K buff, 38160K cached CPU: 3.5% usr 5.1% sys 0.0% nic 91.2% idle 0.0% io 0.0% irq 0.0% sirq Load average: 0.43 0.66 0.32 1/140 1629 5 minuten na startup - met x11vnc - met t...

Maybe handy for someone else. I created a rc.local ( rc.local can be used to do some things after boot) and a startupfile for x11vnc I wanted x11vnc to start at boot and did the following: touch rc.local ln -s /etc/rc.local /etc/rc5.d/S99rc vi /etc/rc.local ====== #!/bin/sh set -e /usr/bin/startx11....

Hi, I get an message on my Toon: Er is een nieuwe Toon firmware (5.0.4) beschikbaar! I have looked in the manual, and did look in the directory's for update files: ls -al /mnt/data/update drwxr-xr-x 2 root root 160 Feb 18 16:39 . drwxr-xr-x 4 root root 288 Feb 19 17:39 .. and ls /HCBv2/tmp/opkg-cach...

Hi, I don't know a lot about toon, so i think better to ask than to do something stu... I have looked up the internet but could not find the answer to my question. Get on screen: Er is een TSC resource file update beschikbaar. Update via TSC menu AUB What does this mean. Can it do any harm. Can i re...

Thanks After a lot off time and looking on the internet. Re-installing nfs-server - checking settings ed. I found out what i had done wrong I had given my previous toon a prefered ip-address by mac-address That was 192.168.1.10 I used that address in my exports When i had to use the nfs server again...

I have or i had a toon with R10 I rooted it with the rooting-script wanted to change password, but this was not supported by busybox So i tryed to replace it with an other version Did get stock with an error 255 and no busybox Tryed with manual to get into u-boot did: telnet localhost 4444 soft_rese...

Hi I did run succesfully the fully automated script to root a toon R10. After that i tryed to change the passwd, but passwd appl is not implemented So i tryed to install a new version of busybox --> I looked at rooting toon (manual) I downloaded: http://files.domoticaforum.eu/uploads/Toon/apps/busyb...

In /etc/openvpn there is a file eneco-001-0xxxxx.tar.gz
I think it was from update-rooted.sh
Can i delete that

And i think manually - walk steps for routing toon - check if all is set correct
Am i right??

Thanks

U-Boot 2010.09-R8 (Dec 03 2012 - 12:50:30) CPU: Freescale i.MX27 at 400.168 MHz Prodrive B.V. ED2.0 DRAM: 128 MiB NAND: 128 MiB LCD: Initializing LCD frambuffer at a1400000 LCD: 800x480, pbb 4 LCD: Drawing the logo... In: serial Out: serial Err: serial Display-bmp: 800 x 480 with 16777216 colors Net...

Hi, Thanks for the filesystem. I tryed it yesterday with nfs boot, it mounted perfectly and started Only quby does a test on NFS mounts, and droped the eth0, and process got waiting - no prompting... But, it starts, so i did try to burn it today. I installed mtd-utils on a host Unpacked the file sys...

Hi, I tryed with copy-ing the busybox from the rootfs to my old rootfs (cp /bin/busybox /mnt/bin/busybox) and restarted but did get an kernel panic.https://www.domoticaforum.eu/posting.php?mode=reply&f=101&t=11230# I think i need a busybox which fits the linux kernel 2.6.36-R10-h27. Can you ...

Yes, I'm sure this was after update. First i did update to the newest update-rooted.sh I did get some download problems with that: wget did not support https I downloaded the latest from the website transfered it with Winscp to toon and run the script. The script stopped with an error Than i could n...