Home Automation Domotica Forum Europe, Bwired Forum

Many thanks for your help i will try to find out.

Output ls -l thru serial connection toon / # ls -l drwxr-xr-x 2 root root 4096 Jan 25 2019 bin drwxrwxr-x 2 root root 4096 Jan 25 2019 boot drwxr-xr-x 2 root root 4096 Jun 15 2019 dev drwxr-xr-x 23 root root 4096 Jun 16 2019 etc drwxrwxr-x 2 root root 4096 Jul 5 2015 lib lrwxrwxrwx 1 root root 12 Ju...

i also tested option 1, same error message, as in previous post. Output with ls /dev pi@raspberrypi:~ $ ls /dev autofs loop4 ram14 tty15 tty4 tty7 vcsa7 block loop5 ram15 tty16 tty40 tty8 vcsm-cma btrfs-control loop6 ram2 tty17 tty41 tty9 vcsu bus loop7 ram3 tty18 tty42 ttyAMA0 vcsu1 cachefiles loop...

Thanks for the input but i didn't turn of the power. Now i trying to recover the toon after a lot of errors i managed to get the Toon in recovery mode. INFO:recovery:Toon booting into recovery shell. For now, just start your favourite serial terminal. So i started i serial communication with an FTDI...

Hi i have an rooted toon for several months, then there was an update, suddenly toonstore was not available anymore. Also TSC menu was gone. I lost my root password, so i tought let's do to entire proces again. Like the Toon was not rooted. With the new 8 charactar password i was been able to login ...

I checked with software configuration tool P6 Serial The serial login shell is disabled, serial interface is enabled. directly after the new raspbian install is made this settings but did not reboot the RPI after i made the changes. Can that be an issue? Now I restarted the RPI and run the Script ag...

Made again a new raspian image And followed step by step the manual and make sure the install of openocd take place. after running the script, the following error appears: pi@raspberrypi:~/ToonRooter $ sudo python . --jtag-available --output-level DEBUG INFO:__main__:Starting up... INFO:__main__:Det...

Hi Many thanks for your reply i removed the early installed openocd directory pi@raspberrypi:~ $ rm -Rf openocd pi@raspberrypi:~ $ git clone --recursive git://git.code.sf.net/p/openocd/code openocd Cloning into 'openocd'... remote: Enumerating objects: 62129, done. remote: Counting objects: 100% (62...

Hi, What did you do to make it working? I have a RPI 2, 11 wires from RPI GPIO to 14 header Toon. Toon -> RPI 2 -> 24 3 -> 25 4 -> 23 5 -> 20 6 -> 22 7 -> 18 8 -> 19 10 -> 21 11 -> 8 13 -> 10 14 -> 9 Other Connections RPI: a screen, a mouse and a keyboard Lan cable power supply Toon connections: 11 ...