Home Automation Domotica Forum Europe, Bwired Forum

No issues encountered.
Thanks again for implementing this, Schelte.

Very nice. I'm running the last version now with span 86400, will report back.

---- MOD GRAF 24h ---- sudo nano /opt/otmonitor/otmonitor.vfs/otmonitor.tcl # change set span = 86400 (t.j. 24h) sudo nano /opt/otmonitor/otmonitor.vfs/docroot/graph.svg.tmpl # change row 3 to min(86400, (t.j. 24h) I suppose this will not work for the webpage (graph will not update after 2 hours). ...

I tried something similar but failed (the graph itself got longer but not the lines).

Would it be possible to make the timespan configurable since graph.js is not interpreted by Tcl?
Maybe better to move this discussion to Github?

I tried changing the span variable in otmonitor.tcl to 10800 (3 hours) as indicated here. It did not change the graph duration on the web page unfortunately. Is there any way to change the duration? OTMonitor is installed on a headless server and I only interact via the web server.

This graph also shows that the boiler is very late in reporting the flame status. The water temperature starts rising long before the flame is reported as on. It's a "feature" of the new control PCB. I did not have this behaviour with the original PCB in the boiler. The short bursts of DH...

I forced the master pump control on ID3 (SR=3:65,33) and I get a completely different behaviour from the system. The thermostat is now "hard" controlling the setpoint and the max. relative modulation level. CH bit is now cleared after a heating cycle since the CS is set at 10°C. Previously...

The interval is 4 seconds according to the summary. Can I add MsgID 0 as an AA to speed up the requests? https://i.imgur.com/GdwoR6k.png Maybe it's also due to the colder weather and the control strategy of the thermostat. The thermostat (Honeywell Round Modulation) does not lower the CS abruptly. I...

The control PCB of my Vitodens 100 got replaced and I noticed that on short burns the flame status bit is not set anymore. This was not the case with the original PCB. Is this something the OTGW could have an influence on? I'm running an older version of the firmware (4.2.5). https://i.imgur.com/5Te...

Hello Schelte,

Would it be possible to release the source for 4.2.6?
I'm using a patched 4.2.5 (patch to use the DS18B20 sensor for RWT).

Thank you.