Home Automation Domotica Forum Europe, Bwired Forum

Connecting pin 7 (CFG - Reload) to pin 3 (GND) does not produce a factory reset. Connecting pin 7 to pin 2 (3.3V) first and then to pin 3 also produces nothing. Fine soldering is not my strong point. I got the front two pins fairly loose. The other seven remain rock solid. Should I buy a desoldering...

According to the USR-TCP232-T2 User Manual v1.0 (page ) there are 3 possibilities for a factory reset. 4.4.3. Factory Reset 1) Hardware: pull “ Reload “ down to 0 V level for 5 seconds then pull CFG( Reload) up to 3.3 V or don’t connect it, resetting is finished. 2) Software: finish it by set-up sof...

According to this paper it is probably possible to change the password witch at commands in a serial terminal: usriot.ru/download/M4/USR-TCP232-E2-AT- ... V1.0.0.pdf.

With " I did not enter a new user and password in the web interface, because I thought I would gain access without a password. " I meant that I made admin/admin empty and then clicked on save or OK, etc. I understand that there is no easy way to reset the web interface? All the software fo...

I managed to lock myself out of my new OpenTherm GateWay , version 2.3, ethernet, from Nodo-shop . I did not enter a new user and password in the web interface, because I thought I would gain access without a password. Unfortunately, the web interface now asks me for login details and I can't access...