Home Automation Domotica Forum Europe, Bwired Forum

You can let the Stretch be updated by Plugwise for 35 euro.

No this is not possible, because they use a additional layer on the Zigbee.

You can have allot of modules and stick's/networks.
But without the multiple networks you can only use 1 stick/network of 64 modules at the time.

Max 64 modules a network, or you need a second network aka stick an +C+ module.

Stretch and Source doesn't work together.
Smile will work in Source.

Try IP/system/status

Maybe easyer to use something like OpenDNS FamilyShield on the devices or on the router for all.

Hold black button for around 15 seconds to reset it, the lights should flash different and then release the button.
Leave the Stretch to reset for 15 minutes.
After the reset the extra module should be gone.

Login on HTML page, by going to the ip address.
Login is smile and the id as password.
Under settings u can disable DHCP and set a static IP address.

Strange, because i still get a error message.

Laatste nieuws: Oplossing beschikbaar voor automatisch doorgeven gasmeterstand Er is nieuwe software beschikbaar waarmee het euvel dat sommige slimme meters sinds 1 januari niet automatisch de gasmeterstanden doorgeven op afstand kan worden verholpen. Meterleverancier Iskrameco heeft hiervoor een aa...

In Source u can find the appliance button under settings. Under there u'll find on the left the appliances, this is also the log data. Notw drag the solar panels appliance to the meters part, on the top left side. The appliance still exists with all the data but there is no meter connected to it (u ...

Its encrypted Zigbee layer on the normal communications, so it will be nearly impossible

For updating firmware 2008 u need the source version 2.17
http://myplugwise.com/source/pwsetup_2.17.exe

Good luck resetting, its a *****

Whats the normal output u get from it?