Home Automation Domotica Forum Europe, Bwired Forum

pmix en svx10 ook verkocht.
Wie doet een leuk bod voor de resterende modules?

Even opgeschoond.
Pazzje heeft niet gereageerd, dus de SVX10 is er nog.
De HCB en de PUX zijn verkocht, Edwin is intussen de CTX35 en wat modules op komen halen. Ook de Irix heeft een nieuwe eigenaar.

Diverse modules Eaton/Holec A10 en Marmitek X10, de meeste gebruikt, sommigen nieuw in verpakking, niet getest: DAIX12 2x PIOX15 2x Verkocht DIX1 4x SAIX12 1x DAX10 7x SVX10 1x Verkocht TMD4 1x Alle modules in één koop: nu €70,- --- IRIX35 IR interface, Verkocht SFX40 sperfilter 1x, €25 AFX2 apparaa...

Ook ik heb interesse in een toegangskaart.
De fundering voor m'n nieuwe huis ligt er, en totdat ik de sleutels krijg is er nog wel wat ruimte voor inspiratie!
Alvast bedankt.

I know this is an old topic and the topicstarter may not read this at all, but i'm running into the same problems, and thought it better to continue this thread iso starting a new one. The problem is not limited to PLCBUS, i'm using Xanura A10 modules that exhibit the same behaviour. What happens is...

The HCB's main advantage is the fact that it uses only 8 Watts of power, as opposed to even the most energy efficient computers which will use between 50 and 150 Watts. If you (for some damn good reason) already keep your PC running for 24/7 you could as well spend the money on homeseer. It's quite ...

I would appreciate your thoughts on this one please. Recently i bought a couple of Visonic sensors, a.o. a couple of MCT-302T magnetic switches, a few MCT-425 smokedetectors and an MCT-234 keyfob. They are to be connected to my Home Control Box through an RXFCom 868.95 MHz USB receiver. The HCB manu...

The filter can be mounted in any installation that uses modern circuit breakers (schakelautomaten) placed on a 'din rail'. The filter cannot be placed inside an old type fusebox with screw type fuses. I expect the ABB box to use a DIN rails, so space permitting you would be able to fit one without a...

The commands that are supported are easily taken from the HCB's API page itself (http://your address/API/). Point your browser there, hover the mouse over the command you're interested in, and in the status bar appears the exact command you eed to execute that function. Any application able to 'get'...

What kind of problem do you run into? The HCB's macro's are rather self explanatory really. Create a new one, enter the conditions on which it should be executed in the top pane, and the actions to be executed in the bottom pane. The 'help' button to the left below the action pane provides a basic e...

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by wifi</i> Do you have an URL?<hr height="1" noshade id="quote"></font id=&q...

The funniest thing just happened... [:O] I decided to upgrade the firmware on my hcb (hey, what better thing to do on a sunday morning at 06:30?). Downloaded the firmware from the Xanura website. This firmware comes in a zip file, and if you unzip it you end up with the firmware (firmware-eh_1.4.15-...

Thanks Bert.

Hi Bert, Thanks for the quick answer. The Visonic detectors and the 868.95 Mhz USB receiver are a done deal since they directly interface with the home control box, no adaptations required. The trouble with the second part of your solution is not that i don't want to spend the money (although this w...

For a while now i've been trying to make sense of the RFXcom stuff. I must say the many options are rather confusing (hey, i'm blond you know [:)]). I was planning to install a number of smokedetectors via an RFXcom receiver to my home control box. Using a 868.95 MHz receiver with a USB interface th...