Home Automation Domotica Forum Europe, Bwired Forum

Hello Lademan,
Sorry for my bad english
when you are in your pannel system / COM and LPT Port you see "9600 8 no 1 no"; you click on "advanced" you see 2 cursors; you put them near the middle

Hello Vincent
just Pmax Remote Programmer is working with USB/serial cable; like Rene describe it.

For the 703N I will see later

YES It's working
Thanks Rene and Viknet


To LADEMAN: just look at serial config in your pannel system of Windows

Hello, I have the same result like LADEMAN, with an other cable. One question to Rene or Viknet: before using this method, do you use Visonic's material? (double RS or Powerlink 2) Because I used Remote Power control firmware and when I went to save it ask me "what the serial Number of my mater...

I saw this topic and I have connected my Powermax Pro (GND,Tx and Rx like Viknet' picture) to PC with Powermax remote controler with this: http://cgi.ebay.fr/USB-to-Serial-Adapte ... 415d279d2b
but nothing; may I do something in the FTDI? (Serial is configured in 9600,8,1,none,none)

@René,
In other post, you confirm that we could connect PC/Powermax remote controler with a USB/RS232 connector to a Powermax Pro.
Could you explain how?

Hello, My MR3020 is always briked; so I buy a new wl703. I install the good firmware; after I delete files for having the same install from Viknet. For that I am using this command: ' opkg remove --force-depends + name of file' And now my new 703 is bricked. When I write 'opkg list-installed ' all f...

You help me too mutch !!! I found this : http://www.disk91.com/2012/technology/networks/piratebox-creation-based-on-tp-link-mr3020/ in the middle: "in case you need to reinstall your piratebox I had to re-flash my PirateBox due to some trouble during installation related to the non accessibilit...

Mine is this:

openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin

the great difference (I haven't /dev/mtdblock3 )comes because I have deleted wrong files

Now I can't connect by ssh because I have deleted files with my password ( see first and last line: "root@(none) )

This is my answer: root@(none):/# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 1536 1536 0 100% / /dev/root 1536 1536 0 100% / tmpfs 14580 16 14564 0% /tmp tmpfs 512 0 512 0% /dev root@(none):/# I am longer from you

I compare my list of packages with yours; I have the double. So I kill / remove a lot of them but my mr3020 doesn't was out of order; I think I delete a file that was useful. Today I restart just on Tenet (192.168.1.1) and I am coming on the front page of OpenWRT; I was reassured. Now, can I reinsta...

All was OK since to test RS232/serial dongle.
I have only 68Kb free and Screen is 142Kb hight
I am looking for an other solution for testing but I don't find

Today I received my new MR3020 (three days from AMAZ...) that's nice
Well tomorrow I will rebegin to install all the system.
I do install:
1) openwrt for MR 3020
2) lighttpd
3) xpl library
4) xpl examples and utilities (if I want)
5) pmax deamon
6) serial driver

Anything else?

It's seems probable. I do receive my new MR3020 on saturday. Today I try to use my serial/USB converter (http://cgi.ebay.fr/USB-to-Serial-Adapter-PL2303-TTL-Cable-Module-Console-Recovery-RS232-New-/280735751467?pt=LH_DefaultDomain_0&hash=item415d279d2b) with Powermax remote programmer software a...

I want to buy mr3020; it's too secure for me.
I look at Viknet when I receive it.
About my 703N, I think that there was a conflict between LUCI and xPLLibexample_1_ar71xx.ipk
Next time I will not install Luci