Home Automation Domotica Forum Europe, Bwired Forum

Needed to do some other things that is why it took a little bit longer than I wanted.

But I soldered a first prototype.
I use KAKU dimmer protocol, so 0% is closed, 100% and every thin in between ( off = closed, on = fully open )
Testing it now .

Bart,

Now the solution is already useful, I can stop the window form opening or closing at any time by pressing on or off again when it is moving. So now I can control it with FHEM. Had problems with the receiver, that I fixed no. The problem was that I removed the batteries, and on start of the moment th...

So after combining my Arduino KAKU receiver and the AXA control it didn't build any more. Softwareserial is not compatible with pinChangeInt. Both use the same interrupt vectors. So I had to give up my debugging serial port :-) and go to the hardware serial port for talking to the AXA remote 2.0. Sm...

Hi all As you can read here I was planning to make a KAKU RF remote receiver that controls my 2 AXE remote windows. With the use of this document http://files.domoticaforum.eu/Axa/AXA%20Remote%202%20domotica%20English%202012nov_V2.pdf that I found via this thread http://www.domoticaforum.eu/viewtopi...

The AWMR-230 is no transmitter, so when using the manual switch Nothing is send around, so also no update on the home automation server. You can work around this problem by buying AWMT-003, and put this behind the switch. and move the AWMR-230, behind the lamp. Then you can get always upto date Home...

thanks, now busy with the first proto type on my breadboard.
very simple receiver, so have to do some filtering and ttl reconstruction.

Bart,

Hi all I just installed the AXA remote 2 in the living room works perfect. Before I bought it I already found this form and thought that this would be easy to control via Domiticz. I already run this for a longtime, only I added a wifi thermostat and a curl 868 for FS20 What I was planning to do is ...