Page 4 of 30

Re: Fully automated rooting script

Posted: Tue Apr 10, 2018 8:47 pm
by martenjacobs
rickvnl wrote:
TheHogNL wrote:
rickvnl wrote: Now it's rooted... but no SSH access. Tried this post viewtopic.php?f=87&t=11999#p85842 but I don't know how to do this.
Please help me out.
If you used the default settings in the auto rooting script there is a public and private key in the same dir where the script is (id_rsa and id_rsa.pub). Just type "ssh -i id_rsa root@<TOON IP ADDRESS>" from that directory and you should be logged into the Toon

Code: Select all

ssh -i id_rsa root@192.168.0.131
The authenticity of host '192.168.0.131 (192.168.0.131)' can't be established.
RSA key fingerprint is SHA256:a7ctIYAi23eG78PshwgEKTqQ1KUjAONV90sVCTMA354.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.131' (RSA) to the list of known hosts.
root@192.168.0.131's password: 
Permission denied, please try again.
You're probably not in the correct folder. id_rsa is a key file generated by the rooting script into the current working directory. If you open a new terminal and it's in a different directory ssh will not be able to find it.

Re: Fully automated rooting script

Posted: Mon Apr 16, 2018 4:54 pm
by Martin101010
@ Marten: When I do a sudo make install I get the following error. Do you have an idea what is wrong?

Code: Select all

pi@raspberrypi:~/openocd $ sudo make install
Makefile:4374: warning: overriding recipe for target 'check-recursive'
Makefile:3787: warning: ignoring old recipe for target 'check-recursive'
make  install-recursive
make[1]: Entering directory '/home/pi/openocd'
Makefile:4374: warning: overriding recipe for target 'check-recursive'
Makefile:3787: warning: ignoring old recipe for target 'check-recursive'
Making install in jimtcl
make[2]: Entering directory '/home/pi/openocd/jimtcl'
cc -Wall  -I. -g -O2 -fno-unwind-tables -fno-asynchronous-unwind-tables  -rdynamic  -o jimsh jimsh.o initjimsh.o libjim.a -ldl
jimsh.o: In function `main':
/home/pi/openocd/jimtcl/jimsh.c:106: undefined reference to `Jim_InitStaticExtensions'
/home/pi/openocd/jimtcl/jimsh.c:106: undefined reference to `Jim_InitStaticExtensions'
/home/pi/openocd/jimtcl/jimsh.c:121: undefined reference to `Jim_InteractivePrompt'
initjimsh.o: In function `Jim_initjimshInit':
/home/pi/openocd/jimtcl/_initjimsh.c:5: undefined reference to `Jim_PackageProvide'
libjim.a(jim.o): In function `JimEscape':
/home/pi/openocd/jimtcl/jim.c:1905: undefined reference to `utf8_fromunicode'
libjim.a(jim.o): In function `JimCommandMatch':
/home/pi/openocd/jimtcl/jim.c:11446: undefined reference to `Jim_AioFilehandle'
libjim.a(jim.o): In function `Jim_FormatCoreCommand':
/home/pi/openocd/jimtcl/jim.c:15011: undefined reference to `Jim_FormatString'
collect2: error: ld returned 1 exit status
Makefile:52: recipe for target 'jimsh' failed
make[2]: *** [jimsh] Error 1
make[2]: Leaving directory '/home/pi/openocd/jimtcl'
Makefile:3787: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '/home/pi/openocd'
Makefile:4086: recipe for target 'install' failed
make: *** [install] Error 2
pi@raspberrypi:~/openocd $

Re: Fully automated rooting script

Posted: Mon Apr 16, 2018 7:34 pm
by martenjacobs
Martin101010 wrote:@ Marten: When I do a sudo make install I get the following error. Do you have an idea what is wrong?

Code: Select all

...
Not really, I'm no expert on OpenOCD at all. I'm thinking though, maybe it's better to clone the v0.10.0 branch of OpenOCD, as it's unlikely that it'll change in the future.
Could you try switching to the v0.10.0 tag and build it again? If this works I'll change the documentation on GitHub

Code: Select all

cd ~/openocd
git reset --hard
git checkout tags/v0.10.0


sudo apt install make libtool libtool-bin pkg-config autoconf automake texinfo libusb-1.0 libusb-dev
{
./bootstrap &&\
./configure --enable-sysfsgpio\
     --enable-bcm2835gpio \
     --enable-maintainer-mode \
     --disable-werror \
     --enable-ft2232_libftdi \
     --enable-ep93xx \
     --enable-at91rm9200 \
     --enable-usbprog \
     --enable-presto_libftdi \
     --enable-jlink \
     --enable-vsllink \
     --enable-rlink \
     --enable-arm-jtag-ew \
     --enable-dummy \
     --enable-buspirate \
     --enable-ulink \
     --enable-presto_libftdi \
     --enable-usb_blaster_libftdi \
     --enable-ft2232_libftdi\
     --prefix=/usr\
&&\
make -j4
} 2>&1 | tee openocd_build.log
sudo make install

Re: Fully automated rooting script

Posted: Mon Apr 16, 2018 8:58 pm
by mAiden
Martin101010 wrote:@ Marten: When I do a sudo make install I get the following error. Do you have an idea what is wrong?

Code: Select all

pi@raspberrypi:~/openocd $ sudo make install
Makefile:4374: warning: overriding recipe for target 'check-recursive'
Makefile:3787: warning: ignoring old recipe for target 'check-recursive'
make  install-recursive
make[1]: Entering directory '/home/pi/openocd'
Makefile:4374: warning: overriding recipe for target 'check-recursive'
Makefile:3787: warning: ignoring old recipe for target 'check-recursive'
Making install in jimtcl
make[2]: Entering directory '/home/pi/openocd/jimtcl'
cc -Wall  -I. -g -O2 -fno-unwind-tables -fno-asynchronous-unwind-tables  -rdynamic  -o jimsh jimsh.o initjimsh.o libjim.a -ldl
jimsh.o: In function `main':
/home/pi/openocd/jimtcl/jimsh.c:106: undefined reference to `Jim_InitStaticExtensions'
/home/pi/openocd/jimtcl/jimsh.c:106: undefined reference to `Jim_InitStaticExtensions'
/home/pi/openocd/jimtcl/jimsh.c:121: undefined reference to `Jim_InteractivePrompt'
initjimsh.o: In function `Jim_initjimshInit':
/home/pi/openocd/jimtcl/_initjimsh.c:5: undefined reference to `Jim_PackageProvide'
libjim.a(jim.o): In function `JimEscape':
/home/pi/openocd/jimtcl/jim.c:1905: undefined reference to `utf8_fromunicode'
libjim.a(jim.o): In function `JimCommandMatch':
/home/pi/openocd/jimtcl/jim.c:11446: undefined reference to `Jim_AioFilehandle'
libjim.a(jim.o): In function `Jim_FormatCoreCommand':
/home/pi/openocd/jimtcl/jim.c:15011: undefined reference to `Jim_FormatString'
collect2: error: ld returned 1 exit status
Makefile:52: recipe for target 'jimsh' failed
make[2]: *** [jimsh] Error 1
make[2]: Leaving directory '/home/pi/openocd/jimtcl'
Makefile:3787: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '/home/pi/openocd'
Makefile:4086: recipe for target 'install' failed
make: *** [install] Error 2
pi@raspberrypi:~/openocd $
Try make before you do make install.

Re: Fully automated rooting script

Posted: Mon Apr 16, 2018 11:28 pm
by marcelr
Hmmm ... It looks like the linker cannot find the library holding a bunch of objects (the undefined references).

Which version of openocd are you using?
You could try the suggestion of mAiden, but if the makefile is any good, make install should depend on make (all), so all stuff that needs to be installed should be built anyway.

I'm not sure why you try to build code for all JTAG adapters, since you will use only one: the bcm2835gpio, on the raspberry. Maybe by toning the requests for all interfaces a bit down, you can bypass the error. I never needed the jimtcl code (not even sure what it is).

Re: Fully automated rooting script

Posted: Tue Apr 17, 2018 6:53 am
by martenjacobs
marcelr wrote:(...)
I'm not sure why you try to build code for all JTAG adapters, since you will use only one: the bcm2835gpio, on the raspberry. Maybe by toning the requests for all interfaces a bit down, you can bypass the error. I never needed the jimtcl code (not even sure what it is).
True, I just broadly copy-pasted the instructions posted here, and didn't give much thought to the flags in there. However, I do think the jimtcl component is required, as it's related to the Tcl programming language, in which (at least) part of OpenOCD is written.

I don't have a Pi on hand now, but I just successfully installed OpenOCD with the following commands on a VM (which is x64-based):

Code: Select all

git clone --recursive git://git.code.sf.net/p/openocd/code openocd
cd openocd
git checkout tags/v0.10.0
sudo apt install make libtool libtool-bin pkg-config autoconf automake texinfo libusb-1.0 libusb-dev
./bootstrap
./configure --enable-bcm2835gpio --prefix=/usr
make -j4 | tee openocd_build.log
sudo make install
If someone could confirm this works on a (somewhat clean) Raspbian install I'll change the documentation on GitHub.

Re: Fully automated rooting script

Posted: Fri Apr 20, 2018 8:19 am
by Martin101010
Marten,

Tried it, but no succes. Then I followed the steps written here:

cdn-learn.adafruit.com/downloads/pdf/pr ... rry-pi.pdf

I see not much differance but it works :-)

Thanks for pointing me in the right direction.

Re: Fully automated rooting script

Posted: Fri Apr 20, 2018 9:58 am
by martenjacobs
Martin101010 wrote:Marten,

Tried it, but no succes. Then I followed the steps written here:

cdn-learn.adafruit.com/downloads/pdf/pr ... rry-pi.pdf

I see not much differance but it works :-)

Thanks for pointing me in the right direction.
That's weird... The only difference I see is the instructions in my repo use --prefix=/usr while those instructions don't. I'm not really sure what that parameter does, so I'm a bit reluctant to remove it... Anyway, I'm glad you were able to get it working.

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 9:51 am
by mAiden
No idea if it will work. But I give it a chance.
Everything installed for automatic Toon rooten, only thing I have yet to find out is, or on an OrangePI (have no other anymore.), how disable serial console and enable serial port on Armbian.

I'm going to try it with this cable.

https://nl.aliexpress.com/item/1pcs-lot ... 0.0.BLnmEo

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 10:30 am
by marcelr
That's a 5V device. Toon has 3.3V logic, so there's a chance some parts may get fried as you go (notably the processor UARTs).

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 10:41 am
by mAiden
marcelr wrote:That's a 5V device. Toon has 3.3V logic, so there's a chance some parts may get fried as you go (notably the processor UARTs).
Dont like that, thanks for the warning Marcel.
Then i need to wait to this one will arrive:

https://nl.aliexpress.com/item/5PCS-USB ... 0.0.cjXhdw

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 11:24 am
by marcelr
That should work. At a bargain price, BTW.

EDIT:

An OrangePi comes with a built-in serial port (At least the one that I have). Can't you use that for rooting?

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 11:30 am
by mAiden
marcelr wrote:That should work. At a bargain price, BTW.
Yes, for sure.. I'll let you know if its arrive, if my Toon is Rooted.

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 11:42 am
by mAiden
marcelr wrote:An OrangePi comes with a built-in serial port (At least the one that I have). Can't you use that for rooting?
Got 2 OrangePi's Marcel.

OrangePI One and Oranje Pi PC SET3

Which do you have?

Re: Fully automated rooting script

Posted: Sun Apr 29, 2018 1:15 pm
by marcelr
zero plus 2 H5