Toon is rooted but not working

Everything about rooting Toons 1 and 2.

Moderators: marcelr, TheHogNL, Toonz

Post Reply
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Toon is rooted but not working

Post by jumans »

I manage to root my toon, and it unlocked the full access buiten weer etc but rebooted it and all disappeared.

I re-rooted but did not make a difference. What am I doing wrong?
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is rooted but not working

Post by TheHogNL »

jumans wrote:I manage to root my toon, and it unlocked the full access buiten weer etc but rebooted it and all disappeared.

I re-rooted but did not make a difference. What am I doing wrong?
Did you follow the manual? viewtopic.php?f=100&t=11235#p82533
I think you didn't run the update-rooted.sh script with option -f to finish/finalize your rooting.
Member of the Toon Software Collective
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

Ok, I have Pi2,

The Toon is now rooted what next. The manual is not clear. I have the raspberry pi2, openocd is installed but I get errors. What is the correct procedure?


The Toon says rooted but what do I do next is not clear.

How to I use the openocd
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is rooted but not working

Post by TheHogNL »

I'm lost what your problem is. If your toon is rooted you don't need openocd anymore. Openocd is also not needed if you are using the toonrooter script (this script will use openocd for you).

They only thing is that, after you root your toon, you need to run the update-rooted.sh script to download the latest firmware and install some necessary software for your rooted toon.
Member of the Toon Software Collective
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

Ok I tried that But I get this error

`sh update-rooted.sh`

update-rooted.sh: 41: [: 954bba48d55dd031405238d0f3e1f828: unexpected operator
strings: '/HCBv2/sbin/hcb_config': No such file
mkdir: cannot create directory ‘/HCBv2’: Permission denied
grep: /etc/opkg/arch.conf: No such file or directory
update-rooted.sh: 373: update-rooted.sh: cannot create /proc/sys/vm/vfs_cache_pressure: Permission denied
update-rooted.sh: 374: update-rooted.sh: cannot create /proc/sys/vm/drop_caches: Permission denied
update-rooted.sh: 1: update-rooted.sh: opkg: not found
update-rooted.sh: 381: [: unexpected operator
update-rooted.sh: 958: [: unexpected operator
update-rooted.sh: 964: update-rooted.sh: cannot create /HCBv2/tmp/opkg-cache/updated-rooted.status: Directory nonexistent
update-rooted.sh: 397: update-rooted.sh: cannot create /root/iptables.save: Permission denied
update-rooted.sh: 403: update-rooted.sh: cannot create /etc/default/iptables.conf: Permission denied
/bin/cp: failed to access '/root/iptables.backup': Permission denied
/bin/cp: failed to access '/root/passwd.backup': Permission denied
update-rooted.sh: 972: update-rooted.sh: cannot create /HCBv2/tmp/opkg-cache/updated-rooted.status: Directory nonexistent
iptables: Permission denied (you must be root).
iptables v1.8.2 (nf_tables): Chain 'UPDATE-INPUT' does not exist
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.8.2 (nf_tables): Chain 'UPDATE-INPUT' does not exist
iptables v1.8.2 (nf_tables): Chain 'UPDATE-INPUT' does not exist
iptables v1.8.2 (nf_tables): Chain 'UPDATE-INPUT' does not exist
update-rooted.sh: 484: [: unexpected operator
sed: couldn't open temporary file /etc/sedz8yZnZ: Permission denied
update-rooted.sh: 505: update-rooted.sh: cannot create /etc/hosts: Permission denied
iptables v1.8.2 (nf_tables): Couldn't load match `tcp':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
/HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
update-rooted.sh: 516: [: 1: unexpected operator
update-rooted.sh: 522: [: qb2: unexpected operator
/usr/bin/md5sum: /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
update-rooted.sh: 529: [: unexpected operator
/bin/sed: can't read /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
/bin/sed: can't read /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
/bin/sed: can't read /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
/bin/sed: can't read /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
/bin/sed: can't read /HCBv2/tmp/opkg-cache/upgrade-qb2.sh: No such file or directory
update-rooted.sh: 996: update-rooted.sh: cannot create /HCBv2/tmp/opkg-cache/updated-rooted.status: Directory nonexistent
update-rooted.sh: 556: update-rooted.sh: opkg: not found
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

This is what I have done
INFO:rooter:Rebooting
INFO:rooter:Your Toon is now rooted. Please wait for it to boot up and try to log in using SSH


now the next stage. I'm a little lost how to code in the part.
mAiden
Member
Member
Posts: 330
Joined: Mon Jul 10, 2017 10:22 am

Re: Toon is rooted but not working

Post by mAiden »

Did you run update-rooted script on Toon? apparently not so.
Member of the Toon Software Collective
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

It's not letting me do that.

How can I do that?

I got so far, how do you add the update to the Toon? I am connected with the Rasberry pi. Then I get lost. Sorry
mAiden
Member
Member
Posts: 330
Joined: Mon Jul 10, 2017 10:22 am

Re: Toon is rooted but not working

Post by mAiden »

Try the code below is in a terminal of your raspberry pi .. Replace ipoftoon with you're Toon ip adresses :)

Code: Select all

ssh root@ipoftoon
Member of the Toon Software Collective
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is rooted but not working

Post by TheHogNL »

jumans wrote:This is what I have done
INFO:rooter:Rebooting
INFO:rooter:Your Toon is now rooted. Please wait for it to boot up and try to log in using SSH


now the next stage. I'm a little lost how to code in the part.
It tells you what to do. "INFO:rooter:Your Toon is now rooted. Please wait for it to boot up and try to log in using SSH"
Member of the Toon Software Collective
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

ok now got it working. How can I change the language on the toonstore to english?
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is rooted but not working

Post by TheHogNL »

jumans wrote:ok now got it working. How can I change the language on the toonstore to english?
The custom apps (including toonstore) don't have any language specific code so if you want another language then presented to you, you need to change the code or contribute to the community and add translations.
Member of the Toon Software Collective
jumans
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 18, 2019 11:46 pm

Re: Toon is rooted but not working

Post by jumans »

ok fair enough, got to practice my dutch ;)
Post Reply

Return to “Toon Rooting”