BTHGN129

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

Post Reply
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

BTHGN129

Post by Herbus »

I added the BTHGN129 to my config. RFXLan gives the following failure continues in the HS3 log:

jan-24 16:07:35 RFXCOM 29 (CheckReceivers) receiver #1 info: resynced
jan-24 16:07:35 RFXCOM Error: 29 (RecRxChar) error :System.InvalidCastException: Conversion from string "BaroForecast.NoInfo" to type 'Byte' is not valid. ---> System.FormatException: Input string was not in a correct format. at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat) at Microsoft.VisualBasic.CompilerServices.Conversions.ToByte(String Value) --- End of inner exception stack trace --- at Microsoft.VisualBasic.CompilerServices.Conversions.ToByte(String Value) at HSPI_RFXCOM.Oregon.processoregon() at HSPI_RFXCOM.receiver.RecRxChar(Byte bytComChar, Int32 irec)

Based on this list I assumed that it could work with an RFXLan: http://www.rfxcom.com/epages/78165469.s ... ies/oregon
The device doesn't show up in the Input Devices screen.

What's going wrong?
Herbus (Jos)
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: BTHGN129

Post by b_weijenberg »

This problem is produced by the BTHGN129 which you have in use.
I have sent you an updated plugin.
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

Re: BTHGN129

Post by Herbus »

Thanks Bert, I will install the update and report the result.
Herbus (Jos)
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

Re: BTHGN129

Post by Herbus »

The update solved the problem. Thanks Bert!
Herbus (Jos)
scottymoen
Starting Member
Starting Member
Posts: 1
Joined: Fri Dec 09, 2016 5:04 pm

Re: BTHGN129

Post by scottymoen »

Dear,

i'm using the BTHGN129-sensor now for a few days.

Temp and humidity are OK, but there is no forecast displayed in Domoticz.

I also have the impression that the value from the baro is not correct (1010 but on sensors give my 1030 hPa)

Hardware: Rfxcom - Rfxtrx433 USB 433,92 Mhz with a Raspi 3

Sofware: Domoticz

Thanks for your reply!

Grtz

Bjorn
Post Reply

Return to “Rfxcom Receivers & Transmitters Forum”