Output devices from HS2 to HS3

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

Post Reply
Wim2008
Advanced Member
Advanced Member
Posts: 718
Joined: Wed Aug 12, 2009 1:42 pm
Location: Eindhoven, Netherlands

Output devices from HS2 to HS3

Post by Wim2008 »

I work with a output device in HS2 and like to bring this device in HS3. It is an RF device Sun-650 and has a code C6 in HS2.
I configer this device in HS3 with the RFXcom installer also with code C6. The device is in the list of devices in HS3. But I get not reaction of this device in HS3 when I push on ON or OFF.
What must I do more to get control of this device in HS3?

B.R. Wim
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: Output devices from HS2 to HS3

Post by b_weijenberg »

with device type ARC or AC?
If AC use the correct Unit code.
Wim2008
Advanced Member
Advanced Member
Posts: 718
Joined: Wed Aug 12, 2009 1:42 pm
Location: Eindhoven, Netherlands

Re: Output devices from HS2 to HS3

Post by Wim2008 »

For the Sun-650 I used the ARC.

Wim
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: Output devices from HS2 to HS3

Post by b_weijenberg »

Configure C6 also on the RFXCOM tab of the device.
Wim2008
Advanced Member
Advanced Member
Posts: 718
Joined: Wed Aug 12, 2009 1:42 pm
Location: Eindhoven, Netherlands

Re: Output devices from HS2 to HS3

Post by Wim2008 »

I did. I see also the Sun-650 in HS3 with a on and off button. But the device don't react if I push on ON or OFF.
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: Output devices from HS2 to HS3

Post by b_weijenberg »

please send a screen copy of the HS2 and HS3 device config to support
Post Reply

Return to “Rfxcom Receivers & Transmitters Forum”