DS2438 (AD)

Forum about Domotiga Open Source Home Automation for Linux.

Moderator: RDNZL

Post Reply
thorgal72
Starting Member
Starting Member
Posts: 5
Joined: Mon Mar 21, 2011 10:12 pm

DS2438 (AD)

Post by thorgal72 »

Hello, I use DS2438 to measure tensions ( AD), but I do not manage to post(show) the values under Domotiga.
Thank you in advance for your answers.
Cordially.
User avatar
RDNZL
Forum Moderator
Forum Moderator
Posts: 1008
Joined: Sun Sep 24, 2006 1:45 pm
Location: Dordrecht, The Netherlands
Contact:

Re: DS2438 (AD)

Post by RDNZL »

Hi, do I feel some tension there? :lol:
Can you tell me which 1-wire interface you use, and supply some debug log info (when debug enabled).
Regards, Ron.
thorgal72
Starting Member
Starting Member
Posts: 5
Joined: Mon Mar 21, 2011 10:12 pm

Re: DS2438 (AD)

Post by thorgal72 »

Hello, I use the Digitemp module with a DS9097.
With this command (under Digitemp "ludo@ludo:/usr/bin$ digitemp_DS9097 -s/dev/ttyS0 -i -a -A ")
i can see : " Apr 09 08:22:50 Sensor 4 VDD: -1.00 AD: 10.23 C: 19.03 "
I need the value AD which is used to measure one electrical power.

With Domotiga,just the measures °C and H% seem readable.

Cordialy
User avatar
RDNZL
Forum Moderator
Forum Moderator
Posts: 1008
Joined: Sun Sep 24, 2006 1:45 pm
Location: Dordrecht, The Netherlands
Contact:

Re: DS2438 (AD)

Post by RDNZL »

The last version now stores all three values of a DS2438 sensor.
Where do you use your tension sensors for? Just curious...
Regards, Ron.
thorgal72
Starting Member
Starting Member
Posts: 5
Joined: Mon Mar 21, 2011 10:12 pm

Re: DS2438 (AD)

Post by thorgal72 »

Hello,
I use a current transformer with an output 0 .. 10 volts to measure the power consumed by my heat pump.
thank you for your answers
Thorgal.
Post Reply

Return to “DomotiGa Forum”