how to set a startup status to off from a plug

Plugwise Forum about Plugwise devices and the Source software.
Post Reply
User avatar
Harry
Member
Member
Posts: 329
Joined: Mon Apr 10, 2006 1:43 am
Location: Drachten

how to set a startup status to off from a plug

Post by Harry »

I like to set a few of my plugs to a startup status off.

after a power off the plugs all switch on after the power is back on on the grid.
i like to set a few plugs to off when the power comes back on to the grid.

i have found the the place it can be set in source, but the option is grayed out ant looks not be avalible .
what do i have to do to get this option to get be annabled.
Fulco
Starting Member
Starting Member
Posts: 5
Joined: Sun Mar 04, 2012 2:53 pm

Re: how to set a startup status to off from a plug

Post by Fulco »

to my knowledge, this option is only available in the most recent (beta) firmware.

However, the whole product Plugwise, is EOL?

Maybe someone can elaborate about the future of Plugwise!

Fulco
stormy
Starting Member
Starting Member
Posts: 1
Joined: Wed Sep 09, 2020 9:18 am

Re: how to set a startup status to off from a plug

Post by stormy »

Hi!

@Fulco : do you know what's the most recent (beta) firmware version that you mentionned???

From my side, all my circles are from 2011-06-13 and 2011-06-27 firmware. I've searched a lot but never find any upgrade.
Do you have a link??? (source application is not showing more recent firmware)

I do want such startup status to off option as my network is really large (>70 items) and each time we've a power outage it's really complicated....

Thanks for your feedback! :)
Fulco
Starting Member
Starting Member
Posts: 5
Joined: Sun Mar 04, 2012 2:53 pm

Re: how to set a startup status to off from a plug

Post by Fulco »

Before Support for Source disappeared, I had email contact with them.
They promised free multiple network support for non-commercial use, and they would make the bèta firmware, which contained the startup behavior, available for me (automatically update, so I don’t have a file).
Unfortunately at the time, I did not had the time to update my (75) modules.

Now the support is gone, modules are not available anymore, Source isn’t updated, multiple network is gone ....
User avatar
Harry
Member
Member
Posts: 329
Joined: Mon Apr 10, 2006 1:43 am
Location: Drachten

Re: how to set a startup status to off from a plug

Post by Harry »

i am olso looking for this option to work.
Post Reply

Return to “Plugwise Forum”