Monitoring Remeha devices

Forum about Opentherm, Hvac, House heating, Boilers

Moderator: hvxl

MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

Re: Monitoring Remeha devices

Post by MindBender »

Yes. This plugin allows you to control the setpoint and read the current temperatures. I supports a regular serial port and a NetMedia SitePlayer serial port over Ethernet. After testing is done, I will release a first version and I hope to add advanced configuration and monitoring features to later releases. It won't be a free plugin, though.
yjb
Member
Member
Posts: 211
Joined: Fri Apr 17, 2009 1:15 pm
Location: Venhuizen, Netherlands

Re: Monitoring Remeha devices

Post by yjb »

Will this plugin also support the gateway, or only the cable that connects to the heater itself?
MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

Re: Monitoring Remeha devices

Post by MindBender »

yjb wrote:Will this plugin also support the gateway, or only the cable that connects to the heater itself?
Just the gateway
MaikelK
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 12, 2018 11:07 pm

Re: Monitoring Remeha devices

Post by MaikelK »

Does anybody still has the links to this project?
I have an on/off relay on my Calenta and dont want to invest in a modulating relay for my Evohome.

I do like to know boiler % and the temperatures etc.

If i read this topic correctly this should be possible. But I cant open the links i get a bad gateway error.
MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

Re: Monitoring Remeha devices

Post by MindBender »

Do you need a Gateway? I think I still have it laying around, because it was a bit of a pity to toss it out.
MaikelK
Starting Member
Starting Member
Posts: 12
Joined: Mon Nov 12, 2018 11:07 pm

Re: Monitoring Remeha devices

Post by MaikelK »

I don’t need the gateway because then I would also need to control the boiler with opentherm, which is not a good option.

So if someone has the information of the links etc. it would be great!
MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

Re: Monitoring Remeha devices

Post by MindBender »

No, you do not; The Gateway takes care of operating the boiler, using OpenTherm. You only need two instruct the GateWay to do things for you, protocol documented here:
http://www.nerdclub.nl/remeha_gateway/index.html
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Monitoring Remeha devices

Post by hvxl »

MaikelK wrote:So if someone has the information of the links etc. it would be great!
The missing links have all been archived by the Wayback Machine.
Schelte
Post Reply

Return to “Hvac, Heating Opentherm Forum”