thermostat resets to 10 deg after set temperature

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
basnijholt
Starting Member
Starting Member
Posts: 1
Joined: Sat Feb 08, 2020 5:14 pm

thermostat resets to 10 deg after set temperature

Post by basnijholt »

Hi all,

I have bought an OTGW kit from Nodo Shop with a NodeMCU.

I am attempting to use the OTGW in combination with Home Assistant, which has an integration for it.

Unfortunately, I am experiencing problems (this issue https://github.com/mvn23/pyotgw/issues/11) with the pyotgw package (connectivity issues).

So I thought that I should find a lower-level solution, therefore I am trying `otmonitor` (which I then plan to connect to Home Assistant via MQTT).

Using `otmonitor` I do not seem to have the connectivity issues, however, I do notice something that also occurs when using the Home Assistant integration, namely, after each set control temperature command, the temperature resets to 10 degrees (see attached screenshot) before turning to the correct temperature.
temperature-resets.png
temperature-resets.png (137.21 KiB) Viewed 1927 times
I have also attached the logs for completeness (https://gist.github.com/basnijholt/1e81 ... 497f8ed0ef).

I have a Remeha iSense v27 and Avanta boiler.

Can anyone tell me if this is expected behavior or not? If not, how can I solve this problem?
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: thermostat resets to 10 deg after set temperature

Post by hvxl »

Yes, this is the expected (necessary) behavior, as I recently explained here: viewtopic.php?f=75&t=12623&p=92797#p92791
Schelte
Post Reply

Return to “Opentherm Gateway Forum”