Toon extender?

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Post Reply
wbmk
Starting Member
Starting Member
Posts: 24
Joined: Sun Nov 13, 2016 5:10 pm

Toon extender?

Post by wbmk »

Hi all,

I am a happy user of a rooted Toon thanx to this forum. :)

I noticed that my meter-unit is a bit to far from the Toon unit as Toon does not allway's get new energie-readings.

I know there is a official Toon extender, but i can't find it in e.g. a store on-line.. does anybody know where to get one (when using a rooted Toon, so i probably can't get one from Eneco) or create a DIY solution?

Thanx in advance and keep up the great work!

WBMK
Rudolf
Member
Member
Posts: 136
Joined: Mon Dec 04, 2017 8:50 pm

Re: Toon extender?

Post by Rudolf »

I think any Toon compatible z-wave plug will be able to extend your network.
Since z-wave is a mesh network, the message should find their destination using other connected devices.

I believe the Toon repeater is from a brand called everspring, see here: https://forum.toon.nl/storingen-problem ... #post10427
I can't find the repeaters online, but the plugs should repeat just fine... https://www.robbshop.nl/manufacturers/everspring
wbmk
Starting Member
Starting Member
Posts: 24
Joined: Sun Nov 13, 2016 5:10 pm

Re: Toon extender?

Post by wbmk »

Thanx Rudolf!

I'll have a look.
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Toon extender?

Post by TerrorSource »

The "Everspring an157-2" was the repeater/z-wave plug Eneco supplied for a while, i guess that every Z-wave wall plug should repeat the signal as the Meteradapter is a z-wave device too.
Other Z-wave wall plugs that i know of:
Fibaro Wall Plug - 55e - Robbshop
Neo CoolCam Wall Plug - 27,50 - marktplaats.
wbmk
Starting Member
Starting Member
Posts: 24
Joined: Sun Nov 13, 2016 5:10 pm

Re: Toon extender?

Post by wbmk »

Thanx TerrorSource, i am looking into buying one!
Post Reply

Return to “Toon Hardware”