Toon Recovery

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TerrorSource, Toonz, TheHogNL

Re: Toon Recovery

Postby Peter1612 » Tue Feb 02, 2021 11:16 am

I rooted a toon and updated to the newest version.
Then i had 0 installed apps in the toon store so i ran the update -f script
now it hangs on the splash screen.
I made a connection with toonrecovery and it says its started so i need to connect by serial for the menu.

But i get this respond:

Cannot exec '/dev/ttyS0': Bestand of map bestaat niet
Peter1612
Starting Member
Starting Member
 
Posts: 8
Joined: December 2020

Re: Toon Recovery

Postby TheHogNL » Tue Feb 02, 2021 4:55 pm

Peter1612 wrote:I rooted a toon and updated to the newest version.
Then i had 0 installed apps in the toon store so i ran the update -f script
now it hangs on the splash screen.
I made a connection with toonrecovery and it says its started so i need to connect by serial for the menu.

But i get this respond:

Cannot exec '/dev/ttyS0': Bestand of map bestaat niet


/dev/ttyS0 is not a command. You need screen or minicom or something similar to connect to your serial port (can be /dev/serial, /dev/ttyS0 or /dev/ttyUSB0 or similar).
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1873
Joined: August 2017

Previous

Return to Toon Hardware

Who is online

Users browsing this forum: No registered users and 1 guest