I want to read powerdata (current and total flow) from the Fibaro alternative Smart Plugs Neo CoolCam.
On the toon forum people say it works including power data. These people probably have a Toon-subscription, but I don't.
I can add the Neo Coolcams to Toon via Zwave and switch them, but no power data is given. How can this be achieved?
Reading powerdata from neo Coolcam
Moderators: marcelr, TheHogNL, Toonz
Re: Reading powerdata from neo Coolcam
Maybe you have to exclude and include them once, on my RPi 3 some of them did include incorrect, so they where useless, till i did the trick.
Have 5 of them here , all working including energy measuring.
greetz, Sjoek
Have 5 of them here , all working including energy measuring.
greetz, Sjoek
Re: Reading powerdata from neo Coolcam
You mean, remove them from Toon and then re-add them? (just getting used to the technical language )
Thanks, I'll try.
Thanks, I'll try.
Re: Reading powerdata from neo Coolcam
It's as simple as that!
Also the plug where first recognized as smart_plug and now as NAS-WR01ZE, which is what they are.
Topic can be closed.
Also the plug where first recognized as smart_plug and now as NAS-WR01ZE, which is what they are.
Topic can be closed.