Toon firmware - update script

Forum about the Toon firmware, and its extensions

Moderators: marcelr, TerrorSource, Toonz, TheHogNL

Re: Toon firmware - update script

Postby NLKris » Fri Nov 08, 2019 11:33 am

Oke, lets give that a go. I had some hope that all the info would help to know why this doenst worked. The toon is still on and can still be accesed. Can I power of en go for the recover or are there still info to save that can be usefull for you guys or me?
NLKris
Starting Member
Starting Member
 
Posts: 24
Joined: January 2019

Re: Toon firmware - update script

Postby TheHogNL » Fri Nov 08, 2019 1:27 pm

Just power off and recover. It is to no use anymore :-)
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby NLKris » Fri Nov 08, 2019 1:37 pm

I did and still trying to configer te recover pi. Abyway, the toon booted and still got root acces. (Never expected that). But still stuck at update. So lets recover.
NLKris
Starting Member
Starting Member
 
Posts: 24
Joined: January 2019

Re: Toon firmware - update script

Postby Ierlandfan » Wed Dec 11, 2019 12:48 pm

Just like a few others I ran into memory issues while updating Toon (1). How about (Optionally) downloading the packages onto external media like USB? Would that work?
Ierlandfan
Member
Member
 
Posts: 150
Joined: October 2013

Re: Toon firmware - update script

Postby TheHogNL » Wed Dec 11, 2019 9:47 pm

Memory or disk space?
USB can't extend memory. It could extend diskspace.
But as any update is 'tested' by Quby to work on the toon there should be enough disk space on your toon to install it. I did recently add some tweaks to free up memory and diskspace on a toon1 before and during updates though.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby mrgnex » Tue Dec 31, 2019 12:50 pm

How do I SSH into my Toon to run the script? If I use putty and SSH into the Toon IP adress I get asked a password I don't have. I have tried to look around for guides but cannot find any.
mrgnex
Starting Member
Starting Member
 
Posts: 4
Joined: December 2019

Re: Toon firmware - update script

Postby TheHogNL » Thu Jan 02, 2020 12:58 pm

mrgnex wrote:How do I SSH into my Toon to run the script? If I use putty and SSH into the Toon IP adress I get asked a password I don't have. I have tried to look around for guides but cannot find any.

That is the password which you should have set during the rooting of the toon. Did you do it yourself or did you buy a rooted toon?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby mrgnex » Thu Jan 02, 2020 1:29 pm

TheHogNL wrote:
mrgnex wrote:How do I SSH into my Toon to run the script? If I use putty and SSH into the Toon IP adress I get asked a password I don't have. I have tried to look around for guides but cannot find any.

That is the password which you should have set during the rooting of the toon. Did you do it yourself or did you buy a rooted toon?


I bought a rooted Toon that allegedly had the root gone wrong. I followed the automated rooting guide from this forum and everything seemed to go fine. I was never asked for a password.
mrgnex
Starting Member
Starting Member
 
Posts: 4
Joined: December 2019

Re: Toon firmware - update script

Postby TheHogNL » Thu Jan 02, 2020 1:58 pm

mrgnex wrote:
TheHogNL wrote:
mrgnex wrote:How do I SSH into my Toon to run the script? If I use putty and SSH into the Toon IP adress I get asked a password I don't have. I have tried to look around for guides but cannot find any.

That is the password which you should have set during the rooting of the toon. Did you do it yourself or did you buy a rooted toon?


I bought a rooted Toon that allegedly had the root gone wrong. I followed the automated rooting guide from this forum and everything seemed to go fine. I was never asked for a password.


That automatic rooting printed the password for you at the end of the process :) The whole idea of 'rooting a toon' is about having root acccess, so with a password :) How did you install toonstore and other stuff afterwards? With root password you can not install those.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby mrgnex » Thu Jan 02, 2020 8:28 pm

TheHogNL wrote:That automatic rooting printed the password for you at the end of the process :) The whole idea of 'rooting a toon' is about having root acccess, so with a password :) How did you install toonstore and other stuff afterwards? With root password you can not install those.


I did not install those yet because I figured I'd update first. I redid the rooting process and made sure I have the right password. I used putty and the build in SSH in the Raspberry Pi. Both gave me an access denied (what is the username? Putty asks me for one..).
I made sure the Toon shows up in the router and the static IP is correct. I also made sure I was using port 22 (otherwise I do not even get the option to enter a password).
Why does it keep telling me access denied?
mrgnex
Starting Member
Starting Member
 
Posts: 4
Joined: December 2019

Re: Toon firmware - update script

Postby TerrorSource » Thu Jan 02, 2020 9:04 pm

Isn't he able to reset the password via TSC?
TerrorSource
Member
Member
 
Posts: 307
Joined: May 2017

Re: Toon firmware - update script

Postby TheHogNL » Thu Jan 02, 2020 10:49 pm

mrgnex wrote:what is the username? Putty asks me for one..)?


Commonplease.... you have ROOTed your toon.. so what should the username be...
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby TheHogNL » Thu Jan 02, 2020 10:49 pm

TerrorSource wrote:Isn't he able to reset the password via TSC?

That only works if he followed the manual and did install the resourcefiles using the proper scripts for that :)
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

Re: Toon firmware - update script

Postby mrgnex » Thu Jan 02, 2020 11:43 pm

TheHogNL wrote:
mrgnex wrote:what is the username? Putty asks me for one..)?


Commonplease.... you have ROOTed your toon.. so what should the username be...


Argh. I tried admin, user, nothing, Toon and even Eneco and nothing would work. In hindsight it is logical. Doh!
It worked flawlessly and I am updated! Thank you for your help. Onto installing the Toon Store!
mrgnex
Starting Member
Starting Member
 
Posts: 4
Joined: December 2019

Re: Toon firmware - update script

Postby TheHogNL » Thu Jan 02, 2020 11:46 pm

mrgnex wrote:
TheHogNL wrote:
mrgnex wrote:what is the username? Putty asks me for one..)?


Commonplease.... you have ROOTed your toon.. so what should the username be...


Argh. I tried admin, user, nothing, Toon and even Eneco and nothing would work. In hindsight it is logical. Doh!
It worked flawlessly and I am updated! Thank you for your help. Onto installing the Toon Store!


For that, just read the rooting manual https://www.domoticaforum.eu/viewtopic. ... 235#p82533
(just run the update-rooted.sh script with option -f )
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1376
Joined: August 2017

PreviousNext

Return to Toon Firmware

Who is online

Users browsing this forum: No registered users and 1 guest