Page 1 of 8

Toon App: solarPanel ---> solar data without hardware

PostPosted: Sat Jan 09, 2021 8:42 pm
by oepi-loepi
In Toonstore Now

From now on it is possible to connect your solar inverter to Toon without the use of cables or hardware.

Even two inverters is now possible (from version 1.3.1.

Image

If you allready have a hardwired solution for this (extra meter and meteradapter): keep the hardwired solution. If you like to change solution to this solution: disable the meteradapter solution first otherwise you get double amounts.

Image

- Install the app
- install a tile
- click on the tile and goto the configuration screen
- select one of the inverters and fill in your credentials
- click "opslaan". Your Toon will be modified for the use of solar features

Image
Image

Image

After installation, more solar features will become visible in the tile setup.

Image

For now the following inverters are available in the setup:
- APS (Altenergy) via portal
- domoticz. Connect via domoticz. (For 1 inverter, give 1 IDX. For 2 inverters give 2 IDX like 14+19)
- enPhase 1 (local version)
- enPhase 2 (API key and user_id needed, fill your user_id in the gebruikersnaam field)(domoticaforum.eu/viewtopic.php?f=99& ... =60#p96841)
- FP4ALL dataloggers
- Fronius
- Growatt
- Goodwe
- kostal piko
- omnik via portal
- omnik local
- pvoutput portal
- sma (for SB1.5, SB 3.0 etc)
- sma (for tl series) (domoticaforum.eu/viewtopic.php?f=99& ... =60#p96807)
- SolarEdge (domoticaforum.eu/viewtopic.php?f=99& ... =30#p96629)
- Solis (Ginglong)
- zeversolar

Further testing needed:
- all inverters above have been successfully tested

Not working:
- please let me know

If you like to have your inverter available as well, please send me a message and i will look into programming an interface.

The first day will have an enormous amount in the graphs. This because the day amount is calculated from the inverter's total amount.

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Sun Jan 10, 2021 11:06 am
by Ron_nl
Very nice work! 8)

I do have a SMA inverter, but it is using bluetooth for reading its data.
Keep up the good work!

Ron.

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Sun Jan 10, 2021 1:04 pm
by rleunk
Have sent you login details for my SMA inverter, good luck with the further development of the app.

rleunk

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Tue Jan 12, 2021 2:44 pm
by Floris25
I Have an SMA device also: connected with UTP. And a Toon 1 (version 5.33.9)
I could do some testing for you if you needed?

Just let me know.

Kind regards
Floris

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Tue Jan 12, 2021 11:23 pm
by oepi-loepi
Floris25 wrote:I Have an SMA device also: connected with UTP. And a Toon 1 (version 5.33.9)
I could do some testing for you if you needed?

Just let me know.

Kind regards
Floris


Zou je svp kunnen testen of jouw sma lokale toegan heeft?

in browser de volgende regel waarbij
smipadress is het adres van je omvormer
jouwwachtwoord = gebruikerswachtwoord van de omvormer

http://smaipadress/dyn/login.json?pass= ... &right=usr

alvast dank!

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Wed Jan 13, 2021 11:14 am
by Floris25
oepi-loepi wrote:
Zou je svp kunnen testen of jouw sma lokale toegan heeft?

in browser de volgende regel waarbij
smipadress is het adres van je omvormer
jouwwachtwoord = gebruikerswachtwoord van de omvormer

http://smaipadress/dyn/login.json?pass= ... &right=usr

alvast dank!


doet helaas niets: Mijn SMA hangt wel in het netwerk (ik kan hem pingen). maar met de regel die je me doorgeeft krijg ik alleen een timeout

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Wed Jan 13, 2021 5:11 pm
by oepi-loepi
wat is het type van jouw omvormer?

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Wed Jan 13, 2021 7:00 pm
by jozg
Hello Oepie Loepie,

I tried the solarpanel app, and installed via the test repository.
I'm using a Growatt inverter and i setup my credentials ok, but the figures stays zero.
When i login to http://server.growatt.com i see that today i have 1.7KWh, but the app says 0.

I allready give my toon a factory data reset, so all my tables are clear.

Is there possible something else wrong?

Thanks for the good work, it looks very promissing!.

Regards,.

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Wed Jan 13, 2021 10:45 pm
by oepi-loepi
I am working on some updates for the daily totals. Please try tomorrow if you receive cuurent power when the sun shines if you still do not receive any data please check your credentials again. It must be an emailadres and a password.

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Wed Jan 13, 2021 10:59 pm
by jozg
Hello,

My credentials are a username and password. So i'm not using a emailaddress as login name.
I can login to http://server.growatt.com with a single username and password.

Could that be a problem?

Regards,

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Thu Jan 14, 2021 9:54 am
by Floris25
oepi-loepi wrote:wat is het type van jouw omvormer?

SMA Sunnyboy
SB 3600TL-21

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Thu Jan 14, 2021 11:42 am
by oepi-loepi
Floris25 wrote:
oepi-loepi wrote:wat is het type van jouw omvormer?

SMA Sunnyboy
SB 3600TL-21


ik ben eerder bezig geweest (en ben nog bezig) met een SB300TL-21 ik denk dat dat hetzelfde is. Die is idd niet op deze manier benaderbaar.

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Thu Jan 14, 2021 12:14 pm
by oepi-loepi
jozg wrote:Hello,

My credentials are a username and password. So i'm not using a emailaddress as login name.
I can login to http://server.growatt.com with a single username and password.

Could that be a problem?

Regards,


The plugin has been updated to version 1.0.8

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Thu Jan 14, 2021 2:59 pm
by Floris25
oepi-loepi wrote:
Floris25 wrote:
oepi-loepi wrote:wat is het type van jouw omvormer?

SMA Sunnyboy
SB 3600TL-21


ik ben eerder bezig geweest (en ben nog bezig) met een SB300TL-21 ik denk dat dat hetzelfde is. Die is idd niet op deze manier benaderbaar.


Op deze site https://robothuis.nl/2020/01/13/zonnepa ... -domoticz/ staat een verwijzing naar github om SMA data uit te lezen in domoticz.
Ze halen daar de data van het internet af (dus niet rechtstreeks vanaf de omvormer die in het LAN zit) in geval van SMA zou je dan tegen 'http://www.sunnyportal.com" aan moeten gaan praten.
Op sunnyportal heb ik een account waar ik mijn eigen productie kan inzien.

de data zou dan gaan van: mijn omvormer --> http://www.sunnyportalcom --> SolarPanel op mijn Toon

is dat ook een optie?


Groeten Floris

Re: Toon App: solarPanel ---> solar data without hardware

PostPosted: Thu Jan 14, 2021 3:32 pm
by Hansb
Hallo
Dit ziet erg erg goed uit. Toppie.
Zal veel werk in zitten.
Ik ben hier nieuw en net begonnen om de Toon te ontdekken .
Ik ziet dat de Growatt omvormer ook zichtbaar te maken is, maar dat je daar een app voor nodig hebt die u ontwikkeld heeft. Kan ik die app ergens downloaden en hoe zet ik hem dan in de Toon?

Vriendelijke groeten
Hans