Home Automation Domotica Forum Europe, Bwired Forum

Code: Select all

Booting Sketch…
No Double Reset Detected, no deletion
SPIFFS Initialize….ok
Reading Data from File:    
total : 1416780
1416780
        File Closed
Writing Data to File
1416780
reading config file
opened config file
{“domEnable”:true,”domoticzUserName”:””,”domoticzPassWord”:””,”domoticzIP”:”10.187.1.110”,”domoticzPort”:”8080”,”domoticzFlowIDX”:”1308”,”domoticzQuantityIDX”:”1309”,”ip”:”10.187.1.121”,”gateway”:”10.187.1.254”,”subnet”:”255.255.255.0”,”PinChar”:”D2”,”spare1”:false,”spare2”:”2000”,”spare3”:false,”spare4”:false,”spare5”:false,”spare6”:true,”spare7”:”10.187.1.111”,”spare8”:”1883”,”spare9”:””,”spare10”:””,”spare11”:”tele/esp-toonWater/SENSOR”,”spare12”:false,”spare13”:14400000,”spare14”:”spare”,”spare15”:”spare”,”spare16”:”spare”,”spare17”:”spare”,”spare18”:”spare”,”spare19”:”spare”,”spare20”:”spare”}
588
New type of config file..no need to update

parsed json
setting custom ip from config
static_ip
10.187.1.121
MQTT is enabled
Setting up wifi from Static IP config

Reading time for homey alarm
Time for Homey leak alarm: 14400000
Div2 is not enabled
static_ip
10.187.1.121
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: 
*WM: Adding parameter
*WM: IP Adres
*WM: Adding parameter
*WM: Gateway
*WM: Adding parameter
*WM: Subnet
*WM: 
*WM: AutoConnect
*WM: Connecting as wifi client…
*WM: Using last saved values, should be faster
*WM: Connection result: 
*WM: 3
*WM: IP Address:
*WM: 10.187.1.121
dhcp : 0
static_ip
10.187.1.121
static_gw
10.187.1.254
static_sn
255.255.255.0
trying to connect…
dhcp : 0
Starting config from Static IP
…connected…yeey :)
ESP Ready! Open http://esp-toonWater.local in your browser
local ip
Ready
IP address: 10.187.1.121
dampingTimeInt: 2000
Attempting MQTT connection…Connecting as toonWater-84:cc:a8:a3:56:ff-ab
connected
*WM: freeing allocated params!
http://10.187.1.110:8080/json.htm?type=command&param=udevice&idx=1308&nvalue=0&svalue=0.0[HTTP] GET… code: 200
http://10.187.1.110:8080/json.htm?type=command&param=udevice&idx=1309&nvalue=0&svalue=1416780[HTTP] GET… code: 200
Send to MQTT: flow :0.00  Quantity : 1416.780