Nemef Radaris Evolution electronic doorlock for Bwired

[petermdevries]

I am seriously considering buying a Nemef Radaris Evolution together with the RF module.

One thing I am not sure about is whether I should choose for the "dubbelzijdig" beslag. I know BWired upgraded to this and other have chosen for this as well but at first sight it seems impractical to me. For example what about visitors in your house if they need to go outside?

Or am I missing something?

[Bwired]

You can connect a switch to the controller which can open the door also.
Its a little bit awkward i agree, but its more safe that the door can not be opened by fishing through the door its mailbox.
also if you have small children its more save. No children and no mailbox in the door i would go for 1 side only

[petermdevries]

Ok, so when using the "enkelvoudig beslag" you'll always be able to unlock and open the door using the handle on the inside. Our dog will be a potential risk as well in that case

But, when using the "dubbelzijdig" beslag is it possible to have this set to an unlocked state (which would mean opening using the handle is possible without pressing a button/using a keys on) when I am home using the RF module and set it to a locked state when I am going to sleep/away (such that the handle cannot be used from the inside)? Is that possible?

If I understand correctly you cannot control the "meerpuntsluiting" using the RF module. You'll always have to lock it by moving the handle upwards. Is that correct?


Sent from my iPad using Tapatalk

[Bwired]

Multilock (Meerpunts) lock can only be used manually.
It is not possible to disable the handle inside by a command.

only 2 options, handle can be used manually from inside directly or the handle does not do anything from the inside also and can be controlled remotely (controller) and/or by an extra physical wall witch connected to the controller.

[Peterpc]

I have a Nemef Radaris Evolution door lock with a hub.
But I currently cannot get a connection to the lock anymore.
When I query the status with >11SR0+ I get <11SR2008+, but when I send >11SR1+ I only get <1*. Also when I operate the lock with the tag, the lock works but I get no response.
I tried using the programming card to re-tag it by holding the card in front of the lock's reader. The led starts blinking green quickly, I send 2x >11PA+, but only get <1* in response.
What could be going on and can anyone help me further?

[Willem4ever]

you can try removing/inserting the batteries from the doorlock and see if that works ....

[Peterpc]

I already replaced the batteries with new ones, but no luck.
Operating the doorlock with the tag still works.
Looks like the connection with the hub is not working anymore.