How to run PMIX35 software under windows / ultimate

[arjanm]

PMIX35 works fine for me for years already, some notes:

- Use driver 6.6.1 (instead of 4.4 I saw mentioned above)

- When trying to send a command and seeing the led blink, but the device is not affected, often this is a issue around voltage.
PMIX35 does reset the voltage level to 0 sometimes when power is lost. Manually set the voltage to 5 volt solves this issue.

- Missing packets with the PMIX35 should not be possible because the buffer is caching all incoming signals.
Make sure the buffer is not full by setting the poll time correctly.

[rances]

Does anyone still have has the x64 driver to share?

[arjanm]

Does anyone still have has the x64 driver to share?

Yes, I have uploaded the driver here: https://filebin.net/g9116o9lukjxv8b8

[rances]

Hi Arjan, is this link broken or it was valid for a limited time? I missed it. Would you mind uploading it again?

[arjanm]

Hi Arjan, is this link broken or it was valid for a limited time? I missed it. Would you mind uploading it again?

The filebin expires in 6 days. This is a new upload: https://filebin.net/vk0y5gdkk6odiwd2

[Snirp]

Does anyone still has the PMIX35 software? Trying to find it somewhere but all the links are no longer working.

[arjanm]

Does anyone still has the PMIX35 software? Trying to find it somewhere but all the links are no longer working.

I uploaded it again: https://filebin.net/hdc9o0179rndjxjs/PMIX35.zip

Are you guys still using the PMIX35?