Hello,
Here is my Co2 Jeenode device.
I read the Voltage from this device to a Jeenode
And with a couple events i read the status
Optimal Ventilation
Good ventilation
Poor ventilation
http://domotica.famschenk.eu/JeeNode_Co2_Device.html
Ed
Co2 Jeenode
Moderator: Mdamen
Re: Co2 Jeenode
Hello,
I have bought them from someone, he never used it
But there also other Co2 device´s with the same controller board.
Ed
I have bought them from someone, he never used it
But there also other Co2 device´s with the same controller board.
Ed
Re: Co2 Jeenode
Good air ventilation system, 476ppm CO2 is a nice value (normal in side a house circa the 350 ppm).
At this moment i also have a small CO2 sensor connect to the Webcontrol PCB, maybe a nice idea to connect it to the Jeenode.
I your sensor a 0-10Vdc signal?
At this moment i also have a small CO2 sensor connect to the Webcontrol PCB, maybe a nice idea to connect it to the Jeenode.
I your sensor a 0-10Vdc signal?
__________________
Re: Co2 Jeenode
Hallo DJ,
No its from 0-4Volt
So i made a sheet with some value's from 0 -4 Volt to PPM and with some script i display the
The led’s within Homeseer and everything is working fine for some weeks now.
Ed
No its from 0-4Volt
So i made a sheet with some value's from 0 -4 Volt to PPM and with some script i display the
The led’s within Homeseer and everything is working fine for some weeks now.
Ed