my stretch has had an firmware upgrade, after upgrade it could not connecting to the circle+.
after that problem i have reseted the circle+. it did not help.
now i read in the manual that the circle+ may not be reseted what should i do to get the connection back?
stretch no connection whith cicle+ after upgrade frmw
-
- Starting Member
- Posts: 48
- Joined: Sun Apr 28, 2013 9:40 pm
- Location: Netherlands (Deventer)
- Contact:
Re: stretch no connection whith cicle+ after upgrade frmw
Hi Harry,
Wich version of the firmware has been installed?
Wich version of the firmware has been installed?
Huisautomatisering - Domotica - Elektronica - IT consulting - Software ontwikkeling - 3D printing - Maatwerk
Website: domoticx.nl / Webshop: domoticx.nl/webwinkel / Knowledge Center: http://domoticx.com
Website: domoticx.nl / Webshop: domoticx.nl/webwinkel / Knowledge Center: http://domoticx.com
Re: stretch no connection whith cicle+ after upgrade frmw
the 2.1.8 version is installed
-
- Starting Member
- Posts: 48
- Joined: Sun Apr 28, 2013 9:40 pm
- Location: Netherlands (Deventer)
- Contact:
Re: stretch no connection whith cicle+ after upgrade frmw
Hmmm i have some stretches with 2.1.8 no problems here!
Whats does http://192.168.x.x/core/networks say?
Is there a "network_coordinator id" line in the xml output?
Whats does http://192.168.x.x/core/networks say?
Is there a "network_coordinator id" line in the xml output?
Huisautomatisering - Domotica - Elektronica - IT consulting - Software ontwikkeling - 3D printing - Maatwerk
Website: domoticx.nl / Webshop: domoticx.nl/webwinkel / Knowledge Center: http://domoticx.com
Website: domoticx.nl / Webshop: domoticx.nl/webwinkel / Knowledge Center: http://domoticx.com
Re: stretch no connection whith cicle+ after upgrade frmw
i have called the helpdesk today,... they told me that the circle+ must be matche to the stretch.
i did reset the cicle+ and that's coursing the problem.... the stretch cannot pair to the cicle+ by it's self
this only can be done by plugwise,...so i have to sent the hardware to plugwise to fix this, they do this without charging costs
lesson to learn ... read first the manual before resseting something
i did reset the cicle+ and that's coursing the problem.... the stretch cannot pair to the cicle+ by it's self
this only can be done by plugwise,...so i have to sent the hardware to plugwise to fix this, they do this without charging costs
lesson to learn ... read first the manual before resseting something
Re: stretch no connection whith cicle+ after upgrade frmw
Can the Stretch users on this forum confirm that firmware version 2.1.8 is the firmware which is publicly available now (So not being een beta user etc.. to get it)Harry wrote:the 2.1.8 version is installed
Thanks,
Rien
Rien
Re: stretch no connection whith cicle+ after upgrade frmw
i am not a Beta user
Re: stretch no connection whith cicle+ after upgrade frmw
I have the same problem and contacted plugwise. They offered me 2 options.
1. Open the stretch and remove the usb stick and re-connect the circle+ via source.
2. Send the stretch to plugwise.
After doing option 1, the circle+ was connected via source. Putting the stick back and rebooting the stretch..... the same problem again.
1. Open the stretch and remove the usb stick and re-connect the circle+ via source.
2. Send the stretch to plugwise.
After doing option 1, the circle+ was connected via source. Putting the stick back and rebooting the stretch..... the same problem again.
Re: stretch no connection whith cicle+ after upgrade frmw
small update on last remark. Everything up and running with option 1