Dear Friends,
is there any guideline what to check/measure on currently built OTGW?
I have no access to the boiler for the moment, so I can't connect OTGW in between boiler and thermostat, but I would like to know if OTGW is working as it should.
All I can do is to power OTGW with 220V.
Many thanks in advance.
Bororo
How to check if OTGW properly assembled?
Moderator: hvxl
Re: How to check if OTGW properly assembled?
hvxl explained this in detail on http://otgw.tclcode.com/debugging.htmlBororo wrote:is there any guideline what to check/measure on currently built OTGW?
Re: How to check if OTGW properly assembled?
Hi Fabian,
thank you for mentioning this guide.
For me it's not clear if part Opentherm Interfaces measurements/checks are done with OTGW connected to boiler and thermostat, but I will check at least parts related to 220V (Power supply).
Thank you for your help.
thank you for mentioning this guide.
For me it's not clear if part Opentherm Interfaces measurements/checks are done with OTGW connected to boiler and thermostat, but I will check at least parts related to 220V (Power supply).
Thank you for your help.
-
- Starting Member
- Posts: 41
- Joined: Tue Aug 13, 2013 10:45 am
Re: How to check if OTGW properly assembled?
The first line says:Bororo wrote:For me it's not clear if part Opentherm Interfaces measurements/checks are done with OTGW connected to boiler and thermostat
If you have built the Opentherm Gateway and it doesn't work, or you are the cautious type and prefer to check the device step by step before hooking everything up
I take this to mean that the checks are done without the boiler or thermostat connected - unless you are told to connect them, e.g in Slave Interface it says:
connect your Opentherm thermostat to X1 and in Master Interface it says: Connect the Opentherm signal from the boiler to X2
Re: How to check if OTGW properly assembled?
That's a matter of careful reading. From the first sentence in the troubleshooting manual:
If you have built the Opentherm Gateway and it doesn't work, or you are the cautious type and prefer to check the device step by step before hooking everything up, here are ...
If you have built the Opentherm Gateway and it doesn't work, or you are the cautious type and prefer to check the device step by step before hooking everything up, here are ...
Re: How to check if OTGW properly assembled?
@D_Hailsham: you beat me by a fraction of a second. Congratulations!
-
- Starting Member
- Posts: 41
- Joined: Tue Aug 13, 2013 10:45 am
Re: How to check if OTGW properly assembled?
As we say in England: RTFM!