Reading powerdata from neo Coolcam

Forum about the Toon firmware, and its extensions

Moderators: marcelr, TheHogNL, Toonz

Locked
jeltel
Starting Member
Starting Member
Posts: 18
Joined: Tue Dec 05, 2017 10:16 pm

Reading powerdata from neo Coolcam

Post by jeltel »

I want to read powerdata (current and total flow) from the Fibaro alternative Smart Plugs Neo CoolCam.

On the toon forum people say it works including power data. These people probably have a Toon-subscription, but I don't.

I can add the Neo Coolcams to Toon via Zwave and switch them, but no power data is given. How can this be achieved?
Sjoek
Starting Member
Starting Member
Posts: 4
Joined: Sun Dec 31, 2017 7:51 pm
Location: Soesterberg

Re: Reading powerdata from neo Coolcam

Post by Sjoek »

Maybe you have to exclude and include them once, on my RPi 3 some of them did include incorrect, so they where useless, till i did the trick.
Have 5 of them here , all working including energy measuring.

greetz, Sjoek
jeltel
Starting Member
Starting Member
Posts: 18
Joined: Tue Dec 05, 2017 10:16 pm

Re: Reading powerdata from neo Coolcam

Post by jeltel »

You mean, remove them from Toon and then re-add them? (just getting used to the technical language :))

Thanks, I'll try.
jeltel
Starting Member
Starting Member
Posts: 18
Joined: Tue Dec 05, 2017 10:16 pm

Re: Reading powerdata from neo Coolcam

Post by jeltel »

It's as simple as that!

Also the plug where first recognized as smart_plug and now as NAS-WR01ZE, which is what they are.

Topic can be closed.
Locked

Return to “Toon Firmware”