Firmware 5.28.9

Forum about the Toon firmware, and its extensions

Moderators: marcelr, TheHogNL, Toonz

PeJeWe
Member
Member
Posts: 80
Joined: Thu Apr 25, 2019 6:51 am

Re: Firmware 5.28.9

Post by PeJeWe »

TheHogNL wrote:
Timeless wrote: Anyone else noticed z-wave problems with the meter-adapter since the update?
First time I hear this. There wasn't a z-wave part update also from your firmware to 5.28.9 so i'm guessing it is something else. Don't know what
After the update I do have P1 port electric, but no gas count for the day.
When I press the button then is see it register gas, but I don't see it on the tile.
Rooted Toon 1, Domoticz running on a RPI3b+, RFXCOM XL, RFLINK.
Timeless
Member
Member
Posts: 54
Joined: Fri Jan 06, 2017 12:51 pm

Re: Firmware 5.28.9

Post by Timeless »

Ok I've pressed "remove all meteradapters & repeaters" and this is the result:

Code: Select all

["2020-05-31 23:21:44 +0200",93,1,0,"%s",["Controller HomeID HIDDEN, NodeID 001, SerialAPIVer 5, chip_type 03 chip_version 01"]],
["2020-05-31 23:21:44 +0200",93,1,0,"%s",["Listening nodes registered 0 (total: 0)"]],
["2020-05-31 23:23:48 +0200",93,1,0,"%s",["Node 9 sends nodeinformation"]],
["2020-05-31 23:24:24 +0200",93,1,0,"%s",["Controller HomeID HIDDEN, NodeID 001, SerialAPIVer 5, chip_type 03 chip_version 01"]],
["2020-05-31 23:24:24 +0200",93,1,0,"%s",["Node:009 Listening:TRUE  FLiRS:FALSE"]],
["2020-05-31 23:24:24 +0200",93,1,0,"%s",["Listening nodes registered 1 (total: 1)"]],
["2020-05-31 23:24:45 +0200",93,1,0,"%s",["First test gave error rate of 0, stop the rest and give full marks"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:0rnd:[1/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=95450 nhv=1"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:1rnd:[2/10] SENT=50 ACK=47 NO_ACK=3 ERROR=0 AVGTIME=67954 nhv=1"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:2rnd:[3/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=38350 nhv=2"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:3rnd:[4/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=68150 nhv=2"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:4rnd:[5/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=66593 nhv=3"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:5rnd:[6/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=67146 nhv=3"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:6rnd:[7/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=57763 nhv=4"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:7rnd:[8/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=71983 nhv=6"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:8rnd:[9/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=70578 nhv=8"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["RESULT: plv:9rnd:[10/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=76566 nhv=10"]],
["2020-05-31 23:40:09 +0200",93,1,0,"%s",["HealthValue Device HAE_METER_v2 intAddr 9 value 10"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:0rnd:[1/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=79723 nhv=1"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:1rnd:[2/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=40574 nhv=1"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:2rnd:[3/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=37336 nhv=2"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:3rnd:[4/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=51175 nhv=2"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:4rnd:[5/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=76795 nhv=3"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:5rnd:[6/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=69985 nhv=3"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:6rnd:[7/10] SENT=50 ACK=49 NO_ACK=1 ERROR=0 AVGTIME=87767 nhv=4"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:7rnd:[8/10] SENT=50 ACK=47 NO_ACK=3 ERROR=0 AVGTIME=120946 nhv=6"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:8rnd:[9/10] SENT=50 ACK=46 NO_ACK=4 ERROR=0 AVGTIME=88975 nhv=6"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["RESULT: plv:9rnd:[10/10] SENT=50 ACK=0 NO_ACK=50 ERROR=0 AVGTIME=0 nhv=6"]],
["2020-05-31 23:40:49 +0200",93,1,0,"%s",["HealthValue Device HAE_METER_v2 intAddr 9 value 6"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:0rnd:[1/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=0 nhv=1"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:1rnd:[2/10] SENT=50 ACK=48 NO_ACK=2 ERROR=0 AVGTIME=99636 nhv=1"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:2rnd:[3/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=100538 nhv=2"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:3rnd:[4/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=112774 nhv=2"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:4rnd:[5/10] SENT=50 ACK=49 NO_ACK=1 ERROR=0 AVGTIME=98553 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:5rnd:[6/10] SENT=50 ACK=45 NO_ACK=5 ERROR=0 AVGTIME=106151 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:6rnd:[7/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=78939 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:7rnd:[8/10] SENT=50 ACK=50 NO_ACK=0 ERROR=0 AVGTIME=79772 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:8rnd:[9/10] SENT=50 ACK=48 NO_ACK=2 ERROR=0 AVGTIME=91747 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["RESULT: plv:9rnd:[10/10] SENT=50 ACK=48 NO_ACK=2 ERROR=0 AVGTIME=95599 nhv=3"]],
["2020-05-31 23:41:37 +0200",93,1,0,"%s",["HealthValue Device HAE_METER_v2 intAddr 9 value 3"]]
So it's still NodeID9 yet the only one listening, is there any way to reach the ozwcp on Toon?
"The greatest good you can do for another, is not to share your own riches, but to reveal to him, his own."
- Benjamin Disraeli -
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Firmware 5.28.9

Post by marcelr »

ozwcp is not part of the standard software on toon. You can install it though, and then access is through a standard http browser.
Timeless
Member
Member
Posts: 54
Joined: Fri Jan 06, 2017 12:51 pm

Re: Firmware 5.28.9

Post by Timeless »

Ah ok, but then it probably means that ozwcp and HCBv2 cannot access the zwave controller simultaneously right?
Is it normal for the meteradapter to become NodeID9? Because I've cleared all meter adapters several times and it still keeps NodeID9. I even tried holding the button on the adapter itself for more than 10sec but this does nothing.
"The greatest good you can do for another, is not to share your own riches, but to reveal to him, his own."
- Benjamin Disraeli -
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Firmware 5.28.9

Post by TheHogNL »

Please try this:

Code: Select all

 sed -i "s/configStatus\.supportControl == '0'/configStatus.supportControl == '-1'/" /qmf/www/hdrv_zwave/js/zwave.js
And then go to http://toon-ip/hdrv_zwave/ (the trailing / must be there). Maybe you can fix your problem using that zwave control page.
Member of the Toon Software Collective
Timeless
Member
Member
Posts: 54
Joined: Fri Jan 06, 2017 12:51 pm

Re: Firmware 5.28.9

Post by Timeless »

Ah that interface does give me some options.
I do see one node NodeID9 with 6 Subdevice endPoint: X name: HAE_METER_v2_X devices, some have CurrentSensorStatus UNKNOWN others are OPERATIONAL, these are probably the individual analog and P1 gas/electric measurements?
There is a factory reset option, maybe this clears everything up, does it have any negative impact if I press that button?
"The greatest good you can do for another, is not to share your own riches, but to reveal to him, his own."
- Benjamin Disraeli -
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Firmware 5.28.9

Post by TheHogNL »

Timeless wrote:Ah that interface does give me some options.
I do see one node NodeID9 with 6 Subdevice endPoint: X name: HAE_METER_v2_X devices, some have CurrentSensorStatus UNKNOWN others are OPERATIONAL, these are probably the individual analog and P1 gas/electric measurements?
There is a factory reset option, maybe this clears everything up, does it have any negative impact if I press that button?
Haven't used it before but I am pretty sure you can always recover from a potential failure. I think it just resets the configuration completly.
Member of the Toon Software Collective
Timeless
Member
Member
Posts: 54
Joined: Fri Jan 06, 2017 12:51 pm

Re: Firmware 5.28.9

Post by Timeless »

Ok, I've used the factory reset option and this did indeed change the HomeID and my single meteradapter now got NodeID2 just like it should. So time will tell if this helped somehow.
"The greatest good you can do for another, is not to share your own riches, but to reveal to him, his own."
- Benjamin Disraeli -
michel30
Member
Member
Posts: 286
Joined: Fri Aug 25, 2017 4:42 pm

Re: Firmware 5.28.9

Post by michel30 »

Hello,

I see on my Toon 1 that there is a new firmware released Firmware 5.30.1 ... is that one safe?
And what is new in this firmware?
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Firmware 5.28.9

Post by marcelr »

Probably 5.30.4, it's been released today. If it's being offered to you via TSC it should be OK to install.
Not sure about novelties, probably not an awful lot, it's hardly ever worth mentioning these days.
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Firmware 5.28.9

Post by TerrorSource »

There's no official changelog but a user on ToonForum posted it.

https://toonforum.nl/d/4-softwareversie-overzicht/59

It's 5.30.4.
Its checked by us and works fine thats why you see the update :)
michel30
Member
Member
Posts: 286
Joined: Fri Aug 25, 2017 4:42 pm

Re: Firmware 5.28.9

Post by michel30 »

Hello,

Thanks for the information.
Post Reply

Return to “Toon Firmware”