Hello,
I always used version 4.3 on my raspbian 32bit version.
Now i gonna use the 64 bit version of raspbian.
I have installed the aarch64 version and it works, only the Inside temperature is always 20.00°C.
I have found when i go back to version 4.3 it wil work, but where can i found version 4.3 of aarch64?
Or is there someone who can help me how to get it to work with this version?
Inside temperature
Moderator: hvxl
Re: Inside temperature
I suspect you may be misdiagnosing the issue. As far as I can recall, nothing has changed regarding the way OTmonitor 5.2 handles the room temperature compared to 4.3.
Please provide a log of the situation that isn't working in your assessment. Also indicate how you verify the room temperature (GUI, web, MQTT, ...).
Please provide a log of the situation that isn't working in your assessment. Also indicate how you verify the room temperature (GUI, web, MQTT, ...).
Schelte
Re: Inside temperature
I also see that I cannot adjust the temperature remotely.
In the log file I see that there is a request to reset the temperature to 13 degrees. But nothing changes.
I copied all settings from the 32bit version.
Log:
This is what i use (on my iphone to change the temperature.
In the log file I see that there is a request to reset the temperature to 13 degrees. But nothing changes.
I copied all settings from the 32bit version.
Log:
Code: Select all
10:02:23.938143 T90181130 Write-Data Room temperature: 17.19
10:02:23.947102 R00740000 Read-Data Burner starts: 0
10:02:24.086099 B40743B56 Read-Ack Burner starts: 15190
10:02:24.093137 AF0181130 Unk-DataId Room temperature: 17.19
10:02:24.971174 T80190000 Read-Data Boiler water temperature: 0.00
10:02:25.093076 B40193C00 Read-Ack Boiler water temperature: 60.00
10:02:26.015145 T10010A00 Write-Data Control setpoint: 10.00
10:02:27.062327 T80000200 Read-Data Status: 00000010 00000000
10:02:27.213354 B40000200 Read-Ack Status: 00000010 00000000
10:02:28.154753 T90100C80 Write-Data Room setpoint: 12.50
10:02:28.161640 R00780000 Read-Data Burner operation hours: 0
10:02:28.306142 BC07819BA Read-Ack Burner operation hours: 6586
10:02:28.314312 A50100C80 Write-Ack Room setpoint: 12.50
10:02:29.154468 T80190000 Read-Data Boiler water temperature: 0.00
10:02:29.306790 B40193C00 Read-Ack Boiler water temperature: 60.00
10:02:30.212895 T10010A00 Write-Data Control setpoint: 10.00
10:02:30.331043 BD0010A00 Write-Ack Control setpoint: 10.00
10:02:31.250421 T80000200 Read-Data Status: 00000010 00000000
10:02:31.423216 B40000200 Read-Ack Status: 00000010 00000000
10:02:31.862765 Command (via websocket): TT=13
10:02:31.926781 TT: 13.00
10:02:32.297408 T90181130 Write-Data Room temperature: 17.19
10:02:32.309442 R007B0000 Read-Data DHW burner operation hours: 0
10:02:32.320671 Command (via websocket): TT=13.5
10:02:32.439988 B407B046A Read-Ack DHW burner operation hours: 1130
10:02:32.442424 AF0181130 Unk-DataId Room temperature: 17.19
10:02:32.480844 TT: 13.50
10:02:32.740524 Command (via websocket): TT=14
10:02:32.854748 TT: 14.00
10:02:33.183361 Command (via websocket): TT=14.5
10:02:33.373232 TT: 14.50
10:02:33.384138 T80190000 Read-Data Boiler water temperature: 0.00
10:02:33.542132 B40193C00 Read-Ack Boiler water temperature: 60.00
10:02:33.633161 Command (via websocket): TT=15
10:02:33.742303 TT: 15.00
10:02:34.111988 Command (via websocket): TT=15.5
10:02:34.252666 TT: 15.50
10:02:34.396644 T10010A00 Write-Data Control setpoint: 10.00
10:02:34.545794 BD0010A00 Write-Ack Control setpoint: 10.00
10:02:34.610693 Command (via websocket): TT=16
10:02:34.666983 TT: 16.00
10:02:35.121677 Command (via websocket): TT=16.5
10:02:35.174549 TT: 16.50
10:02:35.442425 T80000200 Read-Data Status: 00000010 00000000
10:02:35.552323 B40000200 Read-Ack Status: 00000010 00000000
10:02:35.601440 Command (via websocket): TT=17
10:02:35.678852 TT: 17.00
10:02:36.498215 T90100C80 Write-Data Room setpoint: 12.50
10:02:36.506153 R00740000 Read-Data Burner starts: 0
10:02:36.648295 B40743B56 Read-Ack Burner starts: 15190
10:02:36.663311 A50100C80 Write-Ack Room setpoint: 12.50
10:02:37.533534 T80190000 Read-Data Boiler water temperature: 0.00
10:02:37.670096 B40193C00 Read-Ack Boiler water temperature: 60.00
10:02:38.586312 T10010A00 Write-Data Control setpoint: 10.00
10:02:38.751006 BD0010A00 Write-Ack Control setpoint: 10.00
10:02:39.626789 T80000200 Read-Data Status: 00000010 00000000
10:02:39.804816 B40000200 Read-Ack Status: 00000010 00000000
10:02:40.670491 T90181130 Write-Data Room temperature: 17.19
10:02:40.686417 R00780000 Read-Data Burner operation hours: 0
10:02:40.872575 BC07819BA Read-Ack Burner operation hours: 6586
10:02:40.887747 AF0181130 Unk-DataId Room temperature: 17.19
10:02:41.718181 T80190000 Read-Data Boiler water temperature: 0.00
10:02:41.871111 B40193C00 Read-Ack Boiler water temperature: 60.00
10:02:42.763326 T10010A00 Write-Data Control setpoint: 10.00
10:02:42.888522 BD0010A00 Write-Ack Control setpoint: 10.00
10:02:43.810846 T80000200 Read-Data Status: 00000010 00000000
10:02:43.989197 B40000200 Read-Ack Status: 00000010 00000000
10:02:44.868916 T90100C80 Write-Data Room setpoint: 12.50
10:02:44.883919 R007B0000 Read-Data DHW burner operation hours: 0
10:02:44.992178 B407B046A Read-Ack DHW burner operation hours: 1130
10:02:45.006890 A50100C80 Write-Ack Room setpoint: 12.50
Last edited by steefje on Fri Jan 28, 2022 11:09 am, edited 1 time in total.
Re: Inside temperature
Did some more research on the internet today.
I once used the nodo shop manual and it says port 6638.
But now I use port 25238 and I can now adjust the temperature on my phone via the iphone.html page.
Only I keep seeing 20 degrees on the iphone.html page.
While the Opentherm Gateway Status Summary page can read the correct temperature.
I once used the nodo shop manual and it says port 6638.
But now I use port 25238 and I can now adjust the temperature on my phone via the iphone.html page.
Only I keep seeing 20 degrees on the iphone.html page.
While the Opentherm Gateway Status Summary page can read the correct temperature.
Re: Inside temperature
The port was changed in version 0.7.1 of the NodeMCU firmware by rvdbreemen: "Changed to port 25238 for serial TCP connections (default of OTmonitor application by Schelte Bron)"
Now that you finally mention that the issue you have with the temperature is on the iphone.html page, I suspect that you ran into the problem mentioned in this bug report. That bug report also indicates how to patch it.
Now that you finally mention that the issue you have with the temperature is on the iphone.html page, I suspect that you ran into the problem mentioned in this bug report. That bug report also indicates how to patch it.
Schelte
Re: Inside temperature
Thanks it works.
Now i got the right temperature.
Now i got the right temperature.