Page 2 of 3
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Thu Oct 21, 2010 2:34 pm
by Alexander
CF2?
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Fri Oct 22, 2010 5:44 pm
by heubie
You find information at:
http://fussbodenheizung.danfoss.com/Con ... IT326.html
This system is the first time Danfoss used Zwave. It is a closed system and the unit show up as "unknown device" in some software and not at all in other.
There is a remote control unit (CF RC) which let you controle and set al the various thermostats in the house and can program timesettings for vacations or so. It is a very nice system but it is not possible to include this in any domotica gateway.
I have had intensive contact with the development manager (as early as 2006) but so far no luck.
I'm still looking for a way to record the signals send out by the RC so can try to play them back by PC (see
http://www.domoticaforum.eu/viewtopic.p ... 309#p43309)
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Tue Nov 30, 2010 12:58 am
by Alexander
heubie: I would think this is a new development from the previous devices (
http://www.tane.nl/wp/?p=7), which is open to me?
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Tue Nov 30, 2010 12:59 am
by Alexander
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Tue Nov 30, 2010 7:45 pm
by Alexander
Got the email from ezhome: no date yet
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Thu Dec 09, 2010 6:42 pm
by mhn
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Thu Dec 09, 2010 10:13 pm
by TANE
April is not a good time for introducing new thermostat.
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Thu Dec 09, 2010 11:14 pm
by structor
TANE wrote:April is not a good time for introducing new thermostat.
From their point of view it is, if it fails to work the customer will notice after 8 months
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Thu Dec 09, 2010 11:31 pm
by mhn
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Fri Dec 10, 2010 9:16 pm
by Snelvuur
i wonder if they will send out there current temperature too. then you also have a nice temperature readout of the room (but highly unlikely)
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Fri Dec 10, 2010 10:55 pm
by TANE
For that part you can use ST814
ST814 can also trigger the danfoss to turn on (Setback off)
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Fri Dec 10, 2010 11:32 pm
by Snelvuur
would be nice if it was included etc.. 70 euro's for temperature compared to oregon sensors... not that you actually really need temperature readings in every room.
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Sat Dec 11, 2010 11:33 am
by Esteban
Also, I don't think that taking a temperature reading that close to the radiator would acurately reflect the actual room temperature.
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Sat Dec 11, 2010 3:06 pm
by Snelvuur
hmm yes you got a point there, i had a "temperature watch" when i was young.. looked "cool" but didn't really work.
Re: New Energy Saving Z-Wave Thermostat from Danfoss
Posted: Sun Apr 03, 2011 8:59 am
by xanhoera
April 2011 has arrived ... status update?
Anybody already has confirmation that this system is "open"? (as previous posts state it's a closed system)