Home Automation Domotica Forum Europe, Bwired Forum

Hello,

Looking for a thin z-wave wall remote I found very little products..
One remote I found was the Duwi Remote 05445


This looks nice to me as it has many buttons..

- HS3
- Aeotec Gen5 stick
- bunch of Fibaro z-wave devices

Question: Should this work with my setup?

I can't seem to access the Duwi corporate website for more details + there's not a lot of shops selling them.

The pepper1 db shows the following information (please note it seems very old, hence not compatible with todays standards):
http://www.pepper1.net/zwavedb/device/36

I think you can only use it to control the Z-Wave directly, so forgot ANY interaction with you controller (HS3).

Thank you for the information...

Is there any other alternative?

Looking for something similar with 5 or more buttons that do work with Homeseer


Cheers
DJ

Hello,
new here,

This product was part of the Z-Wave product line of the former German Brand Düwi acquired by Z-Wave.Me in March of 2014. The Z-Wave.Me version of the device may not be 100 % compatible with functions of the original Düwi product

See:
http://z-wave.me/index.php?id=34
and
http://pepper1.net/zwavedb/device/576
and here:
domoticz.com/forum/viewtopic.php?f=17&a ... dc507b5fcb
still a struggle to get it working.
Direct, Z-wave to Z-wave device works.
But scenes via Domoticz is still a problem, don't know about Homeseer.

Hope this helps
Domosapiens

I`m using the good old kaku remotes for controlling thing and have on remote in the bedroom to switch off the light (it triggers a HS3 event) the are cheap easy to buy

http://www.klikaanklikuit.nl/shop/nl/af ... -ayct-102/


Note: You need this one to recieve the signals but i already have on for my temp sensors

I use this one:

http://www.hashop.nl/AEO_MREMW

4 buttons, but short press / long press makes 8.