Dimmer with 24v led
Posted: Tue Aug 25, 2015 10:56 pm
I am trying to install a dimmer 2 in a wall box where a led lamp is plugged in. (I am aware of the risks when plugging in other devices then the acutal lamp 
)
This lamp has 48leds on the adapter the output voltage is 24V.
After instelling this dimmer and plugging in the lamp the auto calibration starts, but ends up in a red led.
The lamp itself is on but on a very low strenght. No response on increasing the dimming percentage, nor switching on or off.
When I plug-in another lamp it works perfectly, so installation should be ok.
The manual hints about low power consumption in case when red led is ulluminated.
Do I need to install a bypass or do I need to adjust any parameters ?
)This lamp has 48leds on the adapter the output voltage is 24V.
After instelling this dimmer and plugging in the lamp the auto calibration starts, but ends up in a red led.
The lamp itself is on but on a very low strenght. No response on increasing the dimming percentage, nor switching on or off.
When I plug-in another lamp it works perfectly, so installation should be ok.
The manual hints about low power consumption in case when red led is ulluminated.
Do I need to install a bypass or do I need to adjust any parameters ?