I`ve found out that there is no real topic about Windows 10, so i created this one
I have reinstalled Windows 10 but i`m having some issue to get the house going
- USB Driver issues as stated inthis topic
- Plugwise Source webserver is only running when started as Administrator
- HS3 seems to be running without issue as a NON administrator user
Windows 10
Moderator: Ruud
Windows 10
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: Windows 10
My experience on Win 10 with the above is:
- Initially no issues starting HS3Pro on Win 10 here as non-admin - however, later on I got the dreaded "could not find scheduler.dll" error so starting it as admin again.... To date I have no found a proper solution for this one.....
- USB drivers I had to reload one old driver to control the Xanura PMIX for the A10 plugin.
- Plugwise source - I have abandoned this one since I am using the Plugwise Plugin Pro.
Next, I am using:
- MS/Sysinternals autologon
- Silex USB servers to connect to remote USB dongles/devices over UTP (e.g. Xanura PMIX)
- RFXCOM RFXTrx 433 MHz USB
- Daventech 8-USB poort to control ITHO ventilation through remote.
- Hardware: Zotac Nano ci323 with 128 SSD and 8 GB memory (Zotac can run with 16Gb max confirmed, but for now I do not need that)
Just got a RFXCOM FRXTRX 8xx MHz delivered; not plugged in yet, but will be soon.
Roel
- Initially no issues starting HS3Pro on Win 10 here as non-admin - however, later on I got the dreaded "could not find scheduler.dll" error so starting it as admin again.... To date I have no found a proper solution for this one.....
- USB drivers I had to reload one old driver to control the Xanura PMIX for the A10 plugin.
- Plugwise source - I have abandoned this one since I am using the Plugwise Plugin Pro.
Next, I am using:
- MS/Sysinternals autologon
- Silex USB servers to connect to remote USB dongles/devices over UTP (e.g. Xanura PMIX)
- RFXCOM RFXTrx 433 MHz USB
- Daventech 8-USB poort to control ITHO ventilation through remote.
- Hardware: Zotac Nano ci323 with 128 SSD and 8 GB memory (Zotac can run with 16Gb max confirmed, but for now I do not need that)
Just got a RFXCOM FRXTRX 8xx MHz delivered; not plugged in yet, but will be soon.
Roel
Re: Windows 10
- I also have to start the HSTouch designer as Administrator because otherwise it cannot push to client (files access denied in program files)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: Windows 10
There is a German tool called runas, I think from mastcomputers.de. With that you are able to run a specific program as administrator without having admin rights on whole system.
** edwin **
Re: Windows 10
It is also possible to set this in the properties of the link ¨run as administrator¨Edwin2008 wrote:There is a German tool called runas, I think from mastcomputers.de. With that you are able to run a specific program as administrator without having admin rights on whole system.
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: Windows 10
When migrating to Windows 10, I had quite some issues with HS Touch designer (my HS3 runs on another server). After a clean install of Windows 10 (and not upgrading from Windows 7) everything worked again...