Page 1 of 1
Wireless dimmer 0..10V or 1..10V
Posted: Mon Jun 09, 2008 1:27 pm
by cooledspirit
Hi,
anybody knows some wireless module (preferably RFXCom controllable) that can output 0..10V or 1..10V to steer a dimmer ?
If not available that same module (0..10V or 1..10V) in X10,A10 or even PLCBus is acceptable too...
Kind regards,
David.
Wireless dimmer 0..10V or 1..10V
Posted: Mon Jun 09, 2008 3:33 pm
by cooledspirit
Or some trick that converts 0..230V AC to 0..10V DC ?
Wireless dimmer 0..10V or 1..10V
Posted: Tue Jun 10, 2008 9:22 am
by Lennart
Hi Cooledspirit,
Well, one way to do it - though quite involved - would be to use wireless DMX as an in between protocol. So, PC -> DMX -> Wireless DMX -> 0-10V. You need 1) a DMX interface for your PC, 2) a wireless DMX transmitter and receiver and 3) a DMX to 0-10V interface. These parts are available from
http://www.dmx4u.nl, but I guess this is not what you were hoping for
. Only an option if you're using DMX anyway for lighting control.
Lennart
Wireless dimmer 0..10V or 1..10V
Posted: Fri Jun 13, 2008 3:47 pm
by elektrovakman
In the program of Moeller RF Xcomfort system there ia 2 analogue actors that can send out a signal of 0-10 VDC or 1 - 10 VDC.
See
http://www.draadloosschakelen.nl/instal ... enten.html
Here you see a picture aof all coponents
Gere you can download a catalog in Dutch ( see page 15)
http://www.draadloosschakelen.nl/instal ... tatie.html
I use it al lot and it is very easy and reliable. See the website