Home Automation Domotica Forum Europe, Bwired Forum

I got my RFXCom receiver device and I trying to add my Visonic Smoke Detector to homeseer with rfxcom plugin. I can see the device if I play with the temper switch in RFreceiver but rfxcom plugin (version 11.X.X) won't see the device and I can't add to my homeseer devices list. Same with Visonic remote keyfob. Any Ideas??

Please email me the HS log with debug level 1 enabled in the RFXCOM plug-in.

Bert

Well is my Log. Homeseer says like it can't find one of the receriver but RFreceriver shows me the device just fine (on second press)

Homeseer Log

18/02/2009 23:20:35 Startup Settings Loaded.
18/02/2009 23:20:35 Startup Loading configuration file ...
18/02/2009 23:20:35 Info Loading device types file...
18/02/2009 23:20:35 Database Opening (Mode=Read) up HomeSeer database: C:\Program Files\HomeSeer HS2\config\haddad.mdb
18/02/2009 23:20:36 Info Loading Devices...
18/02/2009 23:20:36 Load Config 48 total devices loaded.
18/02/2009 23:20:36 Load Config Checking device type settings for all devices...
18/02/2009 23:20:36 Load Config Finished checking device type settings.
18/02/2009 23:20:36 Load Config Loading Events...
18/02/2009 23:20:36 Load Config 21 total events loaded.
18/02/2009 23:20:36 Database HomeSeer configuration database C:\Program Files\HomeSeer HS2\config\haddad.mdb has been closed.
18/02/2009 23:20:38 Info HomeSeer version is: 2.3.0.19
18/02/2009 23:20:38 Info Initializing phone interface...
18/02/2009 23:20:38 HSPhone HomeSeer Phone Web Interface initializing.
18/02/2009 23:20:38 Startup Checking for available plug-ins
18/02/2009 23:20:39 Info Found plug-in: AC-RF2 Processor, version: 1.1.3226.27426
18/02/2009 23:20:39 Info Found plug-in: X10 CM11A/CM12U, version: 2.2.0.4
18/02/2009 23:20:39 Info Found plug-in: Applied Digital Ocelot, version: 2.1.0.0
18/02/2009 23:20:39 Info Found plug-in: PLCBUS Connector, version: 1.24.2.2
18/02/2009 23:20:40 Info Found plug-in: RFXCOM, version: 11.0.0.6
18/02/2009 23:20:40 Info Found plug-in: SqueezeBox, version: 1.5.1.0
18/02/2009 23:20:40 Startup Restoring device status
18/02/2009 23:20:40 Startup Initializing Plug-Ins
18/02/2009 23:20:40 Info Interface SqueezeBox is running as a trial, 30 days remaining.
18/02/2009 23:20:40 SqueezeBox Info SqueezeBox version 1.5.1 starting ...
18/02/2009 23:20:40 Info Initializing Plug-in: SqueezeBox
18/02/2009 23:20:40 SqueezeBox Info Verification of base IO code ` complete.
18/02/2009 23:20:40 SqueezeBox Info SqueezeBox - initializing I/O ...
18/02/2009 23:20:40 Info Finished initializing plug-in SqueezeBox
18/02/2009 23:20:40 RFXCOM Restricted for use with RFXCOM receivers/transmitters only.
18/02/2009 23:20:40 Info Initializing Plug-in: RFXCOM
18/02/2009 23:20:40 SqueezeBox Info Connected to SqueezeCenter
18/02/2009 23:20:40 RFXCOM (CreateODevList) device found:A1 INPUT[1]Q
18/02/2009 23:20:40 RFXCOM (InitVariables) Use Degrees in: Celsius
18/02/2009 23:20:40 Info Finished initializing plug-in RFXCOM
18/02/2009 23:20:40 Info Finished initializing X10 interface
18/02/2009 23:20:40 Info Finished initializing infrared interface
18/02/2009 23:20:40 SqueezeBox Info SqueezeCenter Player Count: 1
18/02/2009 23:20:40 Info Local IP address (subnet) is: 192.168.80.104 (255.255.255.0)
18/02/2009 23:20:40 Info Web Server started on port 8041
18/02/2009 23:20:40 Info UPNP Discovery disabled, not running
18/02/2009 23:20:40 Info Web Server authorized local login successful from: 127.0.0.1 User: default
18/02/2009 23:20:41 Info Creating ASP.NET application host...
18/02/2009 23:20:42 Info ASP.NET application host created
18/02/2009 23:20:42 Startup Initializing text to speech
18/02/2009 23:20:42 Info Listening for remote speaker connections on port 8742
18/02/2009 23:20:42 Startup Start remoting
18/02/2009 23:20:42 Startup Start event processing
18/02/2009 23:20:42 Info This version of HomeSeer is registered.
18/02/2009 23:20:42 Startup Scripting is OK
18/02/2009 23:20:42 Info Finished initializing scripting
18/02/2009 23:20:42 Startup Starting scheduler
18/02/2009 23:20:42 Startup Start up complete.
18/02/2009 23:25:17 RFXCOM (RecRxChar) Warning: receiver #1 didn't respond with 2C, retry
18/02/2009 23:25:24 RFXCOM (DeActivateReceiver) Error: receiver #1 didn't respond correctly to the init cmd.
18/02/2009 23:25:24 RFXCOM (DeActivateReceiver) Error: receiver on COM3 not used!

You have to stop RFreceiver before you start Homeseer!

Only one application can communicate with a (virtual) COM port at the same time.

I don't use the Homeseer RFXCOM plugin at same time with RFXreceiver, never did! my problem is that RFXreceiver sees my visonic devices (although only after a second try) and rfxcom plugin don't.

any help will be appreciated very much.
Yossi

what is the reason that the receiver is not seen at COM3?

well, this the reason I post my question. RFreceriver program, sees COM3 with any problem. and I get response from visonic devices.

By the way, I tried ACRF2 and COM3 is ok but visonic device do not register them selfs to ACRF2.

That is the problem: the ACRF2 is started before the RFXCOM plug-in and the ACRF2 has connected the COM port so it is no longer free for the RFXCOM plug-in.
Disable the ACRF2 and restart Homeseer.

Maybe I was misunderstood. I activated ACRF2 only after I disabled RFXCOM and vice-versa. They never worked together on the same port.

There is something wrong in your configuration that blocks access to COM3 for the RFXCOM plug-in.
I will send you a PM how to contact me for a chat to help you finding the source of the problem.

Bert