Home Automation Domotica Forum Europe, Bwired Forum

Hi there,

I'm looking for a device that allow me to control X10 using GSM network. Do you know such a GSM comunicator where to put a sim card and after call to switch on/off few X10 modules. I found on the net SC9000 console but it require landline. Unfortunatlly I don't have in my place.

Thanks for your advice,

You need a device which emulates the line. You should use some GSM gateway. It allows phone calls in GSM network to be received with the connected to the device phone. There is a good kit here: http://x10modules.com/shop/product_info ... cts_id=109

Regards,
Paul

Great minds discuss ideas. Average minds discuss events. Small minds discuss people.

http://www.marmitek.com/en/pdf/9750.pdf

It can have a GSM800 module. You can switch X-10 with it by calling the unit and pushing your phone buttons, or you can do it by sending SMS commands.

Thanks peterpc

I checked Marmitek ProGuard800 it is nice product. Actually I placed order for SC9000 and GSM Gateway kit on

http://x10modules.com/shop/product_info ... cts_id=109

It,s more suitable for me and half price compare to ProGuard800.I will post more details after receive and test it.

Thanks Paul,

Bye

You can also do it with this device:
http://www.domolandia.com/p348/X10-GSM- ... _info.html

It allows you to manage all 256 X-10 adresses and works pretty well. Also it has 3 relays, internal thermostat, ...

Sorry spanish is not my best language