Home Automation Domotica Forum Europe, Bwired Forum

Dear forum members.

Just a strange question , whe are dealer of this product.
( italian design "schakelmateriaal") , but the have also a big assortiment with domotica stuff.

compete catalogus ( groot bestand)<font size="1">http://www.mood-ledlight.nl/pdf-product ... 9-2010.pdf</font id="size1">



Is some-one familair with this. Would it be possible to intergrate this product range within the standard ( x10 , a10 , z-wave or something).

I ask this because the have a with range of very nice product, nice looking control screens etc.

Thanks
Marco

Just a strange question (are you dealer? , don't you). Bticino is the most important italian producer of electrical devices and the headquarter is near my home. I well know their products and i mounted (only switches, plates) them in my new house. I didn't use their domotica solution because it's really too expensive and it requires a dedicated line bus not "friendly" with other protocols . So a CLOSED item. Quality is really wonderful, but you must pay for that... i remeber their offer to make some domotica in my home........... near 50.000 euros........ ok, now i have the same things (i don't speak about look and high class finitures) i mean the same "use" and advantages of a Bticino solution and of a DIY (x10) solution, but i have spend only 2.000 euros! Last thing : their plates are not compatible with x10 wall-switches because of different dimensions. Best regards. Lorenzo

Buona sera drmacchi,

We are dealer of the switches etc , the rest would be a little difficult in the netherlands
( the support here is really bad , from the importeur)

I really like those switches because its very high quality and would be in every thinkeble color.

Just wondering of we can connect the swithes to a z-wave module ( or something ) , just use the nice switches with the standard (diy ) protocols.

Ciao
Marco

Dear Marco, these are the best switches we can find on italian (european?) market. You could use them and integrate domotica protocols (x10) by using the in-wall microswitches from marmitek (link of my reseller http://www.nicoshop.com/cat076.html or xanura that are simply placed behind the Bticino switches, use the wall plates with 4 sockets to have enough space in the wall. Lorenzo

Thanks for sharing the info.

The combination ( bticino switches and z-wave / x10 )would not for commercial use , but I really like the products ( and will use a several after rebuiding our home )

Ciao Marco

You're welcome! Why don't you offer Bticino + DIY domotica protocol to your customers? You' re loosing a big part of the cake! Many people will not do domotica because known as expensive, until they don't discover x10 or similars........

Buona sera drmacchi,

It can be a oppertunity , i will discus it with Enver and Ezhome. Maby we can setup a cooperation togehter
Would be a strong concept I will expect.

Cheers marco

That looks very very nice, even nicer than the Niko switches.
Easy to connect some NO-contact press buttons to any x-10 or whatever kind of remote (remember a pic from chak from a modified remote)
Do you have something on stock? are your prices similar as your Belgium college?

Hi Chiel ,

Normally we dont have it on stock beacuse there to many differt switches.
On the moment we have a order for a customer standing at the office ( customer would be on vacation ).

Every thing must be special ordered , there is no stock here in the netherlands.

The price are quict competentive.

Best regards,
Marco