Home Automation Domotica Forum Europe, Bwired Forum

i have 2 weeks a rfxcom lan reciever the first model whitout http from marktplaats. it worked 2 weeks well, but then only buffer overflow errors.

it appeared that the baudrate was chanced from channel 1, i chanced it to 38400 and it worked well again.

i mention this in the forum because there is nowhere a clear short answer for this problem and it is so simple. and that the baudrate should be 38400.
i can't find an explanation of the other variables of channel 1 ?

labium

The receiver will switch the baud rate from 4800 to 38400 or back when you click the button "Toggle baudrate (don't use)" in RFreceiver.

don't use betekent niet gebruiken

See also chapter 7.7 http://www.rfxcom.com/documents/RFXCOM% ... 0Guide.pdf
and http://www.domoticaforum.eu/viewtopic.php?f=27&t=4425

don't use buttons can still be used, but a clear documentation what happens if you use the butten could be of use. i can't remember using that button, but it could be possible of course.

labium

i am getting:

10-8-2010 15:10:54 - Error - RFXCOM buffer overflow for TCP 192.168.1.60,10001
for some odd reason too. i have not changed anything though.

Check with RFreceiver if normal data is received or something like FFFEDDEAFC....