I have a powerlink2 that works very well.
I just added a dual rs232 module to play around controlling my pmax pro using a serial to ethernet transceiver (I'm using a lot of them at work)
But I'm having some trouble to connect to may panel.
If a use the "pc/gms" port I don't get any answer from the configuration software. I can see increasing number of sent frames but non frames received.
If I use the "pl(I presume stands for powerlink)/pc port" I can connect only if I unplug the powerlink2 ribbon cable.
If the powerlink is connected I can see incoming frames but the visonic software gives me an "access denied" error.
Is it possible to have both powerlink2 and rs32 working at the same time?
How can I use the gsm port, since I don't have a gsm module?
Visonic Powerlink2 Hacked
Moderators: Rene, Willem4ever
Re: Visonic Powerlink2 Hacked
I saw this post
webcache.googleusercontent.com/search?q ... =firefox-a
I rebooted the panel, making external siren to sound, but nothing changed: always no response from the second serial plug.
I didn't try to reset factory settings
webcache.googleusercontent.com/search?q ... =firefox-a
I rebooted the panel, making external siren to sound, but nothing changed: always no response from the second serial plug.
I didn't try to reset factory settings
Re: Visonic Powerlink2 Hacked
i have a gsm module and a rs232 module, that works
powerlink2 with gsm works
powerlink2 with rs232 does not (not in my case)
powerlink2 with gsm works
powerlink2 with rs232 does not (not in my case)
Re: Visonic Powerlink2 Hacked
Ok, so it's supposed to work that way
what a pity: I cannot use rs232 connection unless I detach powerlink2
I have to wait someone find powerlink2 root password...
what a pity: I cannot use rs232 connection unless I detach powerlink2
I have to wait someone find powerlink2 root password...
-
- Starting Member
- Posts: 33
- Joined: Sun Apr 27, 2014 12:30 am
Re: Visonic Powerlink2 Hacked
I too can confirm that the rs232 does not work if the pl2 is plugged in. Shame really.