Page 1 of 1
ZIR010 connection
Posted: Fri Jun 17, 2011 12:12 pm
by Reemster
Are there people here who has with succes communicate PIR010 motion detectors with each other? .. or is this not possible with this type of motion sensor? I have tried everyting to get them communicate with each other.. but with no succes.. any tips?
Re: ZIR010 connection
Posted: Fri Jun 17, 2011 3:48 pm
by TANE
what is the reason that you want this.
PIR's are for detection and can be associated with switches and dimmers.
Every PIR can communicate with more than one device.
Re: ZIR010 connection
Posted: Fri Jun 17, 2011 9:37 pm
by Reemster
i want this so they can transfer a signal through each other (I thought this was possible) That's more energy efficient.. My homeseer server is not really nearby all my z-wave sensors, so bad signal by some sensors, and the battery's are empty fast..
Your sensors don't communicate with each other? i have only Z-wave sensors in my house at the moment.
Re: ZIR010 connection
Posted: Fri Jun 17, 2011 10:15 pm
by TANE
This called routing
Battery power devices can't be used as router. The Express control PIr has this function but this will dry the batteries very quick.
Best is to use some zwave switches or dimmers for extending the distance between your devices.