Home Automation Domotica Forum Europe, Bwired Forum

Hi,

Does anyone know if it's possible to made a connection (only for the video) to connect it to a pc or a other device that can convert video to Ethernet? from this doorcam -> Alecto DVM 91


Grtz,

Hello,

Take a videoserver this is one of the cheapest

http://www.pimzos.nl/shop/aviosys/ipvid ... nector.php

Ed

not possible Ed, this is a wireless camera

Hello,

Sorry this is a rtfm

ed

Not exactly a solution, but it should be possible:
I've heard of it being done with cheap (cabled) video doorbells that send everything over two wires, although I have never seen it working myself. Although wireless, the video signal and 'ringing button' signal, from this doorbell, is sent (from the outdoor part) via a wire to the green connector connection (which supposedly also provides power to the camera) inside, before being converted into a wireless signal (by the indoor part).

So the video is in there somewhere and probably it is using pretty low-level tech. The trick is figuring out how to extract a composite(?)coaxial(?) video signal out of those two wires that you can pipe through an IP video encoder.

That said some other cam solution might be more cost/time effective.

Hi,

Thanks for the tips, i think that this is not really the solution.
I will search for a other solution
Grtz,