Page 1 of 1
Stealth: minimum Source version?
Posted: Thu May 09, 2013 9:46 am
by DJF3
Is a min. Version of the Source SW required to support the steath?
I ran 'add modules' and one unknown module was found. After adding it the status remains ' ? ' (blue icon) and it stays offline.
DJ
Re: Stealth: minimum Source version?
Posted: Thu May 09, 2013 6:58 pm
by RdP
Ik dacht toch al zeker sinds versie 2.17. Heb je de reset procedure al eens uitgevoerd op de stealth ?
Re: Stealth: minimum Source version?
Posted: Fri May 10, 2013 9:45 am
by DJF3
I was running 2.15
After an upgrade to 2.20 the
Stealth is recognized
Now I'll go through the painful FW upgrade process
DJ
Re: Stealth: minimum Source version?
Posted: Fri May 10, 2013 2:13 pm
by DJF3
Arrghhh! So I'm trying to run the updater in 2.20 to get the firmware to some kind of decent level:
- Have to update to 2.23 FIRST.
Without an upgrade to 2.23 none of my modules will upgrade.
And the 2.23 upgrade results in a failure that requires me to do a system restore
Grrr...
DJ
Re: Stealth: minimum Source version?
Posted: Fri May 10, 2013 2:43 pm
by Akatar
that should be solved
did you try to download the source from the plugwise site?
Re: Stealth: minimum Source version?
Posted: Fri May 10, 2013 3:55 pm
by DJF3
Yes... Downloaded 5 minutes before starting the upgrade
For some (unknown) reason, the 2.22 updater now let me upgrade the firmware to the 2011-05-13 without forcing me to upgrade to 2.23.
I should be Ok... Might skip 2.23
DJ