OpenTherm binding for the openHAB home automation system

Forum about OpenHAB open Source Home Automation.

Moderator: raymonvdm

Post Reply
jwspuij
Starting Member
Starting Member
Posts: 14
Joined: Wed Mar 07, 2012 12:05 pm

OpenTherm binding for the openHAB home automation system

Post by jwspuij »

Hi everyone,

I'm one of the developers of the Z-Wave binding for openHAB. I also started working on an Opentherm Gateway binding for the openHAB home automation system. (http://www.openhab.org). OpenHAB is a very flexible and powerful home automation system with extensive rule and scripting support. My goal is to build the ultimate modulating, Opentherm compatible smart thermostat around. With the help of openHAB I can integrate presence detection, messaging, scheduling, outside temperature readings etc all into a very smart heating system. I'm planning on finishing the binding in a couple of weeks, just before I have to start heating my house ;-)

Anyway, the repo is at: https://github.com/jspuij/openhab/tree/ ... rm-gateway

Right now I have both serial and TCP connections reading and I'm reading the messages. Next task will be decoding them and converting them to events on the OpenHAB event bus. Finally I'll implement the commands (including 4.0 firmware) to be sent to the gateway to start controlling the device.

Best regards,

JwS
FoRMaTC
Member
Member
Posts: 89
Joined: Fri Sep 26, 2008 1:50 am
Location: Netherlands

Re: OpenTherm binding for the openHAB home automation system

Post by FoRMaTC »

Hi JwS,

Any update on this?
I'm trilled to put this in openhab

Regards,

Bjorn
Mars
Starting Member
Starting Member
Posts: 23
Joined: Sun Mar 03, 2013 5:02 pm

Re: OpenTherm binding for the openHAB home automation system

Post by Mars »

Hmmm. Last updates where about 1 month ago according to git.

I hope the author continues his work on this very nice binding!

Or has someone else the knowledge and time to finish this binding??
BasVDL
Starting Member
Starting Member
Posts: 2
Joined: Tue Dec 02, 2014 1:34 am

Re: OpenTherm binding for the openHAB home automation system

Post by BasVDL »

Is this threat still actual?
I've got the OpenTherm Gateway and it works great with Domoticz, but I want to use it with openHAB. Is there a binding already?
Maybe I need a gateway/translation and connect it via MQTT or REST?
Post Reply

Return to “OpenHAB Forum”