I do not now where and on witch pins i must make the 1-wire sensors.
Is there some one that will explane to me how i kan make more 1-wire device to my RPi.
Or a link where i can find the right pin out, and the good way to make the 1-wire working, etc.
Thanks!!!
1-wire on the RPi
Re: 1-wire on the RPi
Hi Dylan
Again, did you know there is google?
Enough hits the first 1 explains it exactly how to setup
Good luck
Again, did you know there is google?
Enough hits the first 1 explains it exactly how to setup
Good luck
Re: 1-wire on the RPi
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: 1-wire on the RPi
THANKS!!!!!
This is what i am looking for.
This is what i am looking for.
Re: 1-wire on the RPi
Only how do i get the unic code of the Sensors?
And the code: sudo modprobe w1-gpio is not working, or do i have first the sensor on it?
Can i make in this string the BMP085 on the same way?
And the code: sudo modprobe w1-gpio is not working, or do i have first the sensor on it?
Can i make in this string the BMP085 on the same way?
Re: 1-wire on the RPi
I don`t think it can be connected in the same way. I don`t think it is an 1-wire device. However you can connect it to another gpio pin there are several available on the Pi
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: 1-wire on the RPi
BMP085 talks i2c. The Raspberry Pi can talk i2c too after some modifications.
See http://blog.hekkers.net/2013/09/14/stai ... i-and-i2c/
See http://blog.hekkers.net/2013/09/14/stai ... i-and-i2c/
Re: 1-wire on the RPi
@ All,
It looks like that i bin there allmost..
1 question how do i get the uniqe id, from all the different sensors? Do I get this when i do this tutoriol: cl.cam.ac.uk/projects/raspberrypi/tutor ... mperature/
Is that id for always? or is the sensor evertime get a new id when i connect it to the Rpi?
How do i mark this sensor in Domoticz...? Or in my documentation.?
What is the limit of sensors?
It looks like that i bin there allmost..
1 question how do i get the uniqe id, from all the different sensors? Do I get this when i do this tutoriol: cl.cam.ac.uk/projects/raspberrypi/tutor ... mperature/
Is that id for always? or is the sensor evertime get a new id when i connect it to the Rpi?
How do i mark this sensor in Domoticz...? Or in my documentation.?
What is the limit of sensors?
-
- Starting Member
- Posts: 1
- Joined: Tue May 07, 2013 6:14 am
Re: 1-wire on the RPi
I would like to learn a new application for home automation that uses 1-wire sensors (DS18B20, ds2438) Modbus instruments. domotic-dream is an opensource software like LAMP distributed for free under the GNU GPL3. domotic-dream preinstalled on raspberry and can be downloaded from sourceforge. anyone who wants to use or develop other plugins, to connect to http://www.domotic-dream.com or http://sourceforge.net/projects/domotic ... =directory