Home Automation Domotica Forum Europe, Bwired Forum

Due to a bad HDD I needed to reinstall the server.

Doing so I also installed the new Source 2.23(2130901.2).

Now for some reason all Plugs are showing 0 watt as usage. (ON/OFF is working fine)
Could it be that the firmware in my plugs is to old? (t's version 2008-08-26)

if so, where do I download the latest firmware, and how do I update the plugs with it?

Thank you

Start the upgrade wizzard of the Plugwise software.

/Rien

Great..

Het voorberieden is mislukt bij 1 of meerdere modules.
Voor het optimaal functionere van uw plugwise netwerk dienen modules van het zelfde type dezelfde firmware te hebben.

The Stick has firmware 2008-03-10. The plugs are using: 2008-08-26

Only options available after the message: Afbreken, Opnieuw and Negeren

When I press "Negeren" the update wizard exits.

there is a change you need an older version of the source

Sounds logical.
Anyone here with an "old" version of Source for me that "might" work?

I got 2.22 for you


p.s. I`m using firmware 27-06-2011

Its easy when u know how to
From HD email

Download and install Source 2.17 from http://myplugwise.com/source/pwsetup_2.17.exe
Install the set and click update from Source (this way the Source doesnt update first)
Then the update wizard starts and will update the modules.

Then u can go to the release version of Source and all should work.

Thank you all,

Plugs are updated and the latest source is working fine for me