Experiences with automatic (front)doorlocks

Forum with questions and discussions about security or security devices like Marmitek, Elro Elk (other then Visonic)
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Experiences with automatic (front)doorlocks

Post by raymonvdm »

You need to have a cable to the lock, which is possible using different routes. I`have seen doosr where there is a hole drilled from the top of the door to the position of the lock. There are also doors where the kabel comes out on the inside right behind the lock and goes true a cablecondutor

U can also use a electric (slot kom) to open and close the door (this is normlay done on doors located inside a building)


These locks are arround 700 euro`s i think, in that case an Nemef Radaris lock is not that expensive after all :D (Because it it battery operated as far is i can tell)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
olof
Member
Member
Posts: 281
Joined: Tue Aug 17, 2010 10:00 pm
Location: Netherlands

Re: Experiences with automatic (front)doorlocks

Post by olof »

ok thanks for the info

olof
Post Reply

Return to “Security & Alarmpanels Forum”